Re: DRI not enabled - Why?
On Thu, Mar 21, 2002 at 10:39:49PM -0600, Kent West wrote:
> Kent West wrote:
>
> I was running a custom 2.4.13, but someone mentioned it might be a
> kernel thing, so I upgraded to a custom 2.4.18.
Is agpgart support for your chipset compiled in or as a module? Also,
is the r128 drm support is compiled in or as a module. Before you
start X, load the modules in this order: agpgart, then r128. If it
crashes, try skipping agpgart.
> XFree86 Version 4.1.0.1 / X Window System
> [ ... ]
> (II) ATI: ATI driver (version 6.4.0) for chipsets: ati, ativga
> (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
> ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
> ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
> ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI),
> ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
> ATI Rage 128 Mobility ML (AGP)
> (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
> ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
> ATI Radeon VE (AGP)
> (--) Assigning device section with no busID to primary device
> (--) Chipset ATI Rage 128 Pro PF (AGP) found
> [ ... ]
> (WW) R128(0): Static buffer allocation failed -- need at least 22500 kB
> video memory
??? I don't know what this means.
> (II) R128(0): I2C bus "Rage 128 multimedia bus" initialized.
> (II) R128(0): *** 0x107aa630 versus 0x8711e4c
> (II) Loading /usr/X11R6/lib/modules/multimedia/fi1236_drv.o
> (II) Module fi1236: vendor="The XFree86 Project"
> compiled for 4.0.99.900, module version = 1.0.0
> (II) R128(0): I2C device "Rage 128 multimedia bus:FI12xx Tuner" registered.
> (II) R128(0): Detected FI1236 device at 0xc6
> (II) Loading /usr/X11R6/lib/modules/multimedia/bt829_drv.o
> (II) Module bt829: vendor="The XFree86 Project"
> compiled for 4.0.99.900, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/multimedia/theatre_drv.o
> (II) Module theatre: vendor="The XFree86 Project"
> compiled for 4.0.99.900, module version = 1.0.0
'compiled for 4.0.99.900' ... are you using binary gatos drivers? If
so, the gatos website[1] has a dri debugging guide... check it
out. Basically, I ended up compiling their drm-kernel module and using
that (with X 4.2.0). I got non-agp DRI working on my box that way. My
chipset is very unfriendly with agp'd dri (A7A266) You could try the
drm-kernel modules with debian's 4.1.0 + the substitute gatos XFree
drivers... maybe that will work, but I didn't try it.
Good luck...
Bill
Reply to: