Re: eth0
OH! I've discovered the following.
ifconfig lo
shows that lo has no IP address!!!!!
On Thursday 21 February 2002 11:12 am, Curtis Vaughan wrote:
> Rebooted. Same results. Included below are changes I made to the
> network.opts file. Also, should I reenter eth0 in my interfaces file in
> the line:
>
> auto lo
>
> IPADDR="10.0.0.33"
> NETMASK="255.255.255.0"
> NETWORK="10.0.0.0"
> BROADCAST="10.0.0.255"
> # Gateway address for static routing
> GATEWAY="10.0.0.254"
>
> The DHCP entry is set to "n".
>
> Curtis
>
> PS. BTW, I don't know where the question marks came from.
>
> On Thursday 21 February 2002 10:47 am, Curtis Vaughan wrote:
> > Thanks to Nathan for the advise. I have edited the network.opts file the
> > way I think it should be. Besides the information provided within the
> > network.opts file itself, whereas can I find info for editing it? There
> > is no man entry.
> >
> > After I reboot I will report as to the results.
Reply to:
- Follow-Ups:
- Re: eth0
- From: Curtis Vaughan <curtis@npc-usa.com>
- References:
- Re: eth0
- From: Curtis Vaughan <curtis@npc-usa.com>
- Re: eth0
- From: Curtis Vaughan <curtis@npc-usa.com>