Re: OT: cdburning: tao, dao and fixating
Hi,
On Tue, 19 Feb 2002, Sebastiaan wrote:
> Ah, good to hear. I am not the only one. Well, currently this seems to
> work:
>
> cdrecord dev=1,0,0 speed=2 -v fs=8m -dao bla.iso
> < then the drive complains about this:
>
> Then I do just the same without the -dao parameter (and ejects):
> cdrecord dev=1,0,0 speed=2 -v fs=8m -eject bla.iso
>
>
> My past 4 burns went without problems. I hope that the -dao parameter
> actually does something to the drive (and it is not reset, because the
> tray stays closed). I take the errors for granted and just start the
> normal process.
>
> Perhaps I have been lucky until now. The time will learn.
>
Nope, dream's over. It failed this time again with:
Writing time: 1797.409s
Fixating...
cdrecord: Input/output error. close track/session: scsi sendcmd: retryable
error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 05 00 00 00 00 19 00 06 2F 41 2C 04 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x04 (current program area is empty) Fru 0x0
Sense flags: Blk 0 (valid)
cmd finished after 0.010s timeout 480s
Fixating time: 0.020s
cdrecord: fifo had 16761 puts and 16761 gets.
cdrecord: fifo was 0 times empty and 16491 times full, min fill was 98%.
Greetz,
Sebastiaan
Reply to: