Re: ISDN external terminal adapter setup
Hi,
On Thu, 24 Jan 2002, David Natkins wrote:
> I'm setting up an ADTRAN Express 3000 terminal adapter. I know that
> it doesn't require drivers like the interal boards do. I'm just not
> clear on how you set it up. Please let me know which Howtos, FAQ's,
> etc., I should read.
ISDN-TAs are run like normal modems, thus you use the set-up procedure
for modems (with pppd not ipppd involved). The only thing which has to
be cared about in addition are the dial-string and some settings in the
active profile of the ISDN-TA: The dial-string command ATDT has to be
changed to ATD. In the active profile (either in the configuration
scripts or permanently saved with minicom) the ISDN-TA has to be set to
HDLC and the async/sync PPP should be set as requested by the provider.
Best wishes,
Kerstin
--
Dr. Kerstin Hoef-Emden Gyrhofstr. 15
Universität zu Köln 50931 Köln
Botanisches Institut Germany
Reply to: