[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: insmod bttv does not find TV card--says no such device???

mikepolniak wrote:


My Pinnacle studio PCTV pro card shows up in /proc/pci and i can load all the
required modules (tuner, videodev,i2c)...but when i
#insmod bttv card=52
...it says no such device.

Syslog  shows :
... bttv: driver version 0.7.83 loaded
... bttv: using 2 buffers with 2080k (4160k total) for capture
... bttv: Host bridge is Silicon Integrated Systems ......but then it fails to find the card. 

#/proc/pci shows:
 Bus  0, device  17, function  0:
    Multimedia video controller: PCI device 10de:036e (nVidia Corporation) (rev 17).
      IRQ 11.

#lsmod
Module                  Size  Used by
i2c-algo-bit 7072 0 videodev 2912 0 tuner 8048 0 (unused) 
cmpci                  23984   1  (autoclean)
r128 82848 1 it87 6960 0 i2c-proc 5936 0 [it87] 
i2c-isa                 1216   0  (unused)
i2c-core               12768   0  [i2c-algo-bit tuner it87 i2c-proc i2c-isa]
ide-scsi 7344 0 sis900 11264 1 (autoclean) 
rtc                     5376   0  (autoclean)

So what do i need to do to have bttv find this device?




This is what my /etc/modutils/bttv looks like:

==CUT HERE==

options i2c-core        i2c_debug=0
options i2c-algo-bit    bit_test=1

options tuner type=0
options bttv card=1
==CUT HERE==

and this is the relevant part of my lsmod output:

tuner                   8032   1  (autoclean)
tvaudio                 9660   0  (autoclean) (unused)
bttv                   60096   1  (autoclean)
videodev                4512   3  (autoclean) [bttv]
i2c-algo-bit            7016   1  (autoclean) [bttv]
i2c-core 12708 0 (autoclean) [tuner tvaudio bttv i2c-algo-bit] 

try:
modprobe bttv card=1; modprobe tuner type=0

Since I have a similar card as you this should work. I'm assuming
of course that you have the bttv related things compiled as
modules.

Hope that helps,
David.
Reply to: