[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

cdrecord no longer works in DAO mode



Hi everyone,

Although it has worked fine in the past, I'm now having trouble
getting cdrecord to record an audio CD in DAO mode.  Note that the
same tracks record perfectly in TAO mode and data CDs also work fine.
I'm using kernel 2.4.17, but the problem is the same under 2.4.14 and
possibly earlier.  The CDR drive is IDE, and is used with the
ide-scsi, sg, etc. modules.  A log file of a simulation run is
included below:

Thanks!


Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "0,0,0" fs=4096k  -v -useinfo speed=8 -dao -dummy -eject -pad -audio <files> ...

scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.22
pregap1: -1
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 0 = CD-DA
Using libscg version 'schily-0.5'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'PLEXTOR '
Identifikation : 'CD-R   PX-W8432T'
Revision       : '1.09'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
Drive buf size : 4194304 = 4096 KB
FIFO size      : 4194304 = 4096 KB
Track 01: audio   0 MB (00:03.56) no preemp pad padsize:  73 KB (00:00.42)
Track 02: audio  72 MB (07:13.42) no preemp
Track 03: audio  39 MB (03:57.18) no preemp
Track 04: audio  29 MB (02:58.26) no preemp
Track 05: audio  57 MB (05:41.09) no preemp
Track 06: audio  45 MB (04:27.60) no preemp
Track 07: audio  64 MB (06:24.62) no preemp
Track 08: audio  38 MB (03:46.14) no preemp
Track 09: audio  59 MB (05:52.50) no preemp
Track 10: audio  38 MB (03:49.98) no preemp
Track 11: audio  48 MB (04:49.24) no preemp
Track 12: audio  72 MB (07:09.88) no preemp pad
Track 13: audio  41 MB (04:05.33) no preemp
Track 14: audio  57 MB (05:43.26) no preemp
Track 15: audio  36 MB (03:37.15) no preemp pad
Track 16: audio  22 MB (02:15.26) no preemp pad
Total size:     725 MB (71:55.01) = 323626 sectors
Lout start:     726 MB (71:57/01) = 323626 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type C, low Beta category (C-) (6)
ATIP start of lead in:  -11640 (97:26/60)
ATIP start of lead out: 337350 (75:00/00)
Disk type:    Long strategy type (Cyanine, AZO or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 337350 Blocks current: 336823 Blocks remaining: 13197
RBlocks total: 349030 RBlocks current: 348503 RBlocks remaining: 24877
Starting to write CD/DVD at speed 8 in dummy mode for single session.
0 seconds. Operation starts.
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
Waiting for reader process to fill input buffer ... input buffer ready.
CDB:  2A 00 00 00 01 2E 00 00 1B 00
Sending CUE sheet...
status: 0x2 (CHECK CONDITION)
Writing pregap for track 1 at 302
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 03 00 00
write track pad data: error after 0 bytes
Sense Key: 0x5 Illegal Request, Segment 0
BFree: 2338 K BSize: 2338 K
Sense Code: 0x2C Qual 0x03 (current program area is not empty) Fru 0x0
Starting new track at sector: 452
Sense flags: Blk 0 (not valid) 
cmd finished after 0.000s timeout 200s
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 01 C4 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 03 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x03 (current program area is not empty) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 200s

Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
write track data: error after 0 bytes
Writing  time:    5.010s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time:    0.000s



Reply to: