Re: new to the list - XFree86 on Woody problems
1. If you have a mouse config problem, the server rarely crashes on
startup. You will get a screen but the mouse will not work
properly...i.e. no movement or erratic movement.
If I move the mouse while x is running (it crashes during the kde screen
'loading peripherals') the movement is erratic and leaves bits of the
screen behind as i move it.
You could stick with the old XFree v. 3.3.6
server you were using,
It seemed to disappear without trace during the upgrade!
Note, I am using the gpm package. I had to configure gpm-config to set
the "Repeat-type: raw" to make it work...in case you are interested. If
you don't use gpm, then set the "Device" to "/dev/psaux".
neither /dev/gpmdata (gpm is running) or /dev/psaux work, it crashes at the
same point with both
I suggest you run a "apt-get install xfonts-pex" and see what happens.
If this doesn't improve things, try "apt-get --reinstall install
xfonts-pex".
I have done this and it installed and reinstalled but no difference to the
problem
It has been suggested that perhaps my card is not supported by the newer
XFree86, which I suppose is a possibility.
Rachel
http://www.edgeofmyseat.com
Web Development, tutorials, Dreamweaver Extensions and more...
http://www.rachelandrew.co.uk
Personal site, online ramblings and far too much purple
Reply to: