Re: eth0 doesn't work under 2.4.9
Marc Becher [debian-user] <10/09/01 20:34 +0200>:
> hum, appears a little strange, as I do not have any problem with
> the eepro100, but with the 8139too (I used rtl8139 with 2.2.19) I have exactly
> the same problem, but ifconfig does not really bring the interface up. It is
> shown, but I can't ping it.
>
> Any hints are welcome -- marc
As a further check (but I don't know if it is relevant!),in
/var/log/messages I find the following:
<snip>
PCI: PCI BIOS revision 2.10 entry at 0xf0478, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 2: assuming transparent
PCI: Discovered primary peer bus 04 [IRQ]
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
<snip>
Vittorio
Reply to: