Re: Help!!! Ethernet card hell!
Which kernel are you using. I have a set of natsemi drivers compiled for 2.2.19 that I can send if they will help.
Ed
On Sat, Jun 23, 2001 at 02:07:04PM -0400, Aaron Traas wrote:
> I can't upgrade to the new kernel because I can't get the new kernel
> because I don't have a network connection.
>
> I tried downloading the network stuff from Scyld, but was unsuccessful
> in compiling them. I think I need the kernel-header package which is not
> included on my potato CD.
>
> Does Woody ship with 2.4 kernel? If so, can I just download the install
> floppy and try that way? Otherwise, does anyone sell Woody CD's?
>
> Thanks for your response.
>
> --Aaron
>
> Edward Kear wrote:
> >
> > natsemi is included in kernel 2.4.x. If you can upgrade to that, that would be best.
> > You can download the driver for kernel 2.2.x from
> > www.scyld.com/network/ethecard.html
> > read www.scyld.com/network/updates.html for compiling/installation instructions.
> > good luck
> >
> > On Sat, Jun 23, 2001 at 11:42:19AM -0400, Aaron Traas wrote:
> > > Overall, I love Debian as an OS. I've used it many times in a work
> > > environment, and apt-get simply rules. However, I have yet to
> > > successfully install Debian on one of my home machines. Here is the
> > > situation:
> > >
> > > I have 5 different ethernet cards without a permanent home: 4 different
> > > Tulip variants, and a Netgear FA311. I'm trying to get these to work on
> > > Debian 2.2r2. I am unable to get 2.2r3 because A) my CDRW on my Windoze
> > > box just died, and B) I can't get this machine to work with any ethernet
> > > card I have, so installing over the network is not an option.
> > >
> > > I've tried absolutely everything on the Tulip variants... all versions
> > > of the driver included (ng_tulip, old_tulip, tulip) in various ways.
> > > Most recently, I got one of the variants of the tulip to work by
> > > installing a clean system, and entering the following commands:
> > >
> > > insmod tulip
> > > ifconfig eth0 inet 10.1.1.50 netmask 255.255.255.0 broadcast 10.1.1.255
> > > ifconfig eth0 up
> > > ping 10.1.1.1
> > >
> > > And everything worked fine! It was great! So I decided to re-install the
> > > system, and configure everything I wanted. I selected the tulip driver,
> > > and it loaded. I entered the same information above, along with a
> > > default gateway and DNS server address. The install finished, and I
> > > tried to ping the same address. It timed out.
> > >
> > > I tried various things, including rmmoding the driver, and insmoding it,
> > > and redoing everything with ifconfig, but nothing works.
> > >
> > > I'd like to know what is going on here. I know for the fact the card was
> > > working just a few minutes ago. I also know that all of the cards I have
> > > work well under both Red Hat and Mandrake, which I used prior to Debian
> > > and got sick of.
> > >
> > > Also, what driver am I supposed to use for the Netgear FA311? In other
> > > distros, it uses natsemi.o, which is not present in Debian 2.2r2.
> > >
> > > Can someone tell me what is going on? Debian is an incredibly robust OS,
> > > but if it can't work with the same ethernet cards that other distros use
> > > with ease, I'm going to have to switch back. I have 4 machines I want to
> > > install Debian on, all of which are currently running Mandrake and have
> > > Tulip cards in them (one of them has 4 such cards and is being used as a
> > > router), and I can't afford to just buy 7 new NICs.
> > >
> > > Does anyone have a solution for me?
> > >
> > >
> > > --
> > > To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
> > > with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> > >
> > >
> >
> > --
> > To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
> > with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>
> --
> To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>
Reply to: