Re: Ethernet device
On Sat, Jun 23, 2001 at 07:27:27PM -0300, Juan wrote:
> Hi Kent,
>
> Thanks for answer.
>
>
> > > iface lo inet loopback
> > > iface eth0 inte static
> > > address 192.168.66.1
> > > netmask 255.255.255.0
> >
> >iface eth0 inte static
> > ^^^^
> >should be inet
> Sorry. It was a typo error. My files is already inet :)
>
> My problem is that eth0 is not found when I restart my computer.
> I have to manually type modprobe rtl8139 ...
>
> How can I configure my Ethernet card? Does Debian has netcfg or similar?
You have two things going on here:
Put the module name for your card in /etc/modules then it will be loaded on boot.
ifconfig is used to configure your card but is lost at boot which is why you
edit /etc/network/interfaces.
After editing /etc/network/interfaces and running -
# /etc/init.d/networking
if everything is ok then you have that done.
Put rtl8139 in /etc/modules test with a reboot.
Your networking should work now the way you want it.
hth,
kent
--
From seeing and seeing the seeing has become so exhausted
First line of "The Panther" - R. M. Rilke
Reply to: