Can't make-kpkg deb of pcmcia-modules with wavelan2 patch
I have submitted a bug about this, but since I am using an external
patch (for wavelan2) I'm not sure I'll get a response. Can anyone
please help me?
I am using Debian 2.2r3, with many packages from woody. (I will try
to give version numbers of all relevant packages from woody, but if I
have omitted any please email me and ask.) I am trying to compile the
PCMCIA modules including the wavelan2 module, using make-kpkg. I have
custom compiled kernel-source-2.2.19 version 2.2.19-5 using make-kpkg.
I have libc6 and libc6-dev 2.2.3-6, pcmcia-cs 3.1.25-3, pcmcia-source
3.1.25-3, and kernel-package 7.43. I also have patched
/usr/src/modules/pcmcia-cs using wavelan2_cs-6.06.tar. I can
successfully compile the PCMCIA modules ``manually'' (i.e., by
executing make config and make all), but I cannot make a
pcmcia-modules deb with make-kpkg. The debian rules fail with the
wavelan2 patch because there is no
/usr/src/modules/pcmcia-cs/debian/tmp-modules/etc/pcmcia/config
generated by the rules. I have not yet installed my custom-compiled
kernel as the running kernel; is that relevant? If necessary I can
send my kernel config file, though I don't think that's relevant
either. A transcript follows. (It's rather long; the error occurs at
the very bottom, naturally.) I obtained wavelan2_cs-6.06.tar from
http://www.net.cmu.edu/docs/services/campus/wireless-linux.html .
Thanks in advance,
Ruchira Datta
datta@math.berkeley.edu
koladvip:/usr/src/linux# !make-kpkg
make-kpkg --revision=pathlab.1.0 modules_image
Warning: The revision option only has an effect during
the configure phase -- in other words, since the file
stamp-configure exists, this option has no effect.
Also, this option has no effect when compiling
any independent modules; the version from the last
make-kpkg run when you compiled the kernel-image
shall be used.
Run make-kpkg clean or, if you know what you are doing,
manually remove stamp-debian, stamp-configure and
debian/changelog for it to have an effect
Please hit return to continue
test -f stamp-debian || make -f /usr/share/kernel-package/rules debian
test -f .config || make -f /usr/share/kernel-package/rules .config
test ! -f stamp-configure \
&& make CROSS_COMPILE= \
ARCH=i386 oldconfig \
&& make CROSS_COMPILE= \
ARCH=i386 dep \
&& make CROSS_COMPILE= \
ARCH=i386 clean && \
touch stamp-configure
make: [stamp-configure] Error 1 (ignored)
for module in /usr/src/modules/toshutils /usr/src/modules/pcmcia-cs ; do \
if test -d $module; then \
(cd $module; \
if ./debian/rules KVERS="2.2.19" KSRC="/usr/src/linux" \
KMAINT="Unknown Kernel Package Maintainer" KEMAIL="unknown@unconfigured.in.etc.kernel-pkg.conf" \
KDREV="pathlab.1.0" kdist_image; then \
echo "Module $module processed fine"; \
else \
echo "Module $module failed."; \
echo "Hit return to Continue"; \
read ans; \
fi; \
); \
fi; \
done
make[1]: Entering directory `/usr/src/modules/toshutils'
dh_testdir
cd src && \
cc -m486 -O2 -Wall -D__KERNEL__ -DKERNEL -DMODULE -c toshiba.c \
-o toshiba.o -I /usr/src/linux/include
/tmp/cc4TbATS.s: Assembler messages:
/tmp/cc4TbATS.s:9: Warning: Ignoring changed section attributes for .modinfo
# We have to hack the control file first.
sed 's/#KVERS#/2.2.19/g' debian/control.modules > debian/control
# And set up files so debhelper can find them.
ln -sf toshiba.modules toshiba-2.2.19.modules
dh_clean -k
Unrecognized escape \s passed through at /usr/bin/dh_clean line 15.
Unrecognized escape \p passed through at /usr/bin/dh_clean line 16.
Unrecognized escape \p passed through at /usr/bin/dh_clean line 17.
Unrecognized escape \p passed through at /usr/bin/dh_clean line 18.
Unrecognized escape \p passed through at /usr/bin/dh_clean line 19.
dh_testdir
dh_testroot
dh_installdirs lib/modules/2.2.19/misc
install -m 0644 src/toshiba.o debian/tmp/lib/modules/2.2.19/misc
dh_installdocs
dh_installchangelogs
dh_strip
dh_compress
dh_fixperms
dh_installdeb
dh_gencontrol -u"-v1.9.9-1+pathlab.1.0"
Unrecognized escape \s passed through at /usr/bin/dh_gencontrol line 24.
dh_md5sums
dh_builddeb --destdir=/usr/src/linux/..
dpkg-deb: building package `toshiba-2.2.19' in `/usr/src/linux/../toshiba-2.2.19_1.9.9-1+pathlab.1.0_i386.deb'.
dh_testdir
dh_testroot
rm -f build-stamp
make distclean
make[2]: Entering directory `/usr/src/modules/toshutils'
make[2]: *** No rule to make target `distclean'. Stop.
make[2]: Leaving directory `/usr/src/modules/toshutils'
make[1]: [clean] Error 2 (ignored)
dh_clean src/toshiba.o src/Makefile
Unrecognized escape \s passed through at /usr/bin/dh_clean line 15.
Unrecognized escape \p passed through at /usr/bin/dh_clean line 16.
Unrecognized escape \p passed through at /usr/bin/dh_clean line 17.
Unrecognized escape \p passed through at /usr/bin/dh_clean line 18.
Unrecognized escape \p passed through at /usr/bin/dh_clean line 19.
# The dependancies take care of building the module package.
make[1]: Leaving directory `/usr/src/modules/toshutils'
Module /usr/src/modules/toshutils processed fine
make[1]: Entering directory `/usr/src/modules/pcmcia-cs'
test -f man/pcmcia.5 -a -f debian/rules
test root = "`whoami`"
test -f man/pcmcia.5 -a -f debian/rules
rm -f debian/files
make -f debian/rules MOD_DIR=/usr/src/linux clean-modules binary-modules
make[2]: Entering directory `/usr/src/modules/pcmcia-cs'
test -f man/pcmcia.5 -a -f debian/rules
umask 022; make DEB_MOD=yes clean
make[3]: Entering directory `/usr/src/modules/pcmcia-cs'
make[4]: Entering directory `/usr/src/modules/pcmcia-cs/modules'
rm -f core core.* *.o .*.o *.s *.a *~ .depend .depfiles/*.d
make[4]: Leaving directory `/usr/src/modules/pcmcia-cs/modules'
make[4]: Entering directory `/usr/src/modules/pcmcia-cs/clients'
rm -f core core.* *.o .*.o *.s *.a *~ .depend .depfiles/*.d
make[4]: Leaving directory `/usr/src/modules/pcmcia-cs/clients'
make[4]: Entering directory `/usr/src/modules/pcmcia-cs/wireless'
rm -f core core.* *.o .*.o *.s *.a *~ .depend .depfiles/*.d
make[4]: Leaving directory `/usr/src/modules/pcmcia-cs/wireless'
rm -f .prereq.ok config.mk include/pcmcia/config.h
rm -f include/linux/modversions.h
make[3]: Leaving directory `/usr/src/modules/pcmcia-cs'
rm -f build-modules
test -f man/pcmcia.5 -a -f debian/rules
test root = "`whoami`"
KVERS="2.2.19" ./Configure -n --kernel="/usr/src/linux" --srctree \
--cardbus --rcdir=/etc --cc=cc
-------- Linux PCMCIA Configuration Script --------
The default responses for each question are correct for most users.
Consult the PCMCIA-HOWTO for additional info about each option.
Linux source directory [/usr/src/linux]
The kernel source tree is version 2.2.19.
The current kernel build date is Sat Jun 9 14:48:14 2001.
Build 'trusting' versions of card utilities (y/n) [n]
Include PnP BIOS resource checking (y/n) [n]
The PCMCIA drivers need to be compiled to match the kernel they
will be used with, or some or all of the modules may fail to load.
If you are not sure what to do, please consult the PCMCIA-HOWTO.
How would you like to set kernel-specific options?
1 - Read from the currently running kernel
2 - Read from the Linux source tree
Enter option (1-2) [2]
Module install directory [/lib/modules/2.2.19]
Kernel configuration options:
Symmetric multiprocessing support is disabled.
PCI BIOS support is enabled.
Power management (APM) support is enabled.
SCSI support is disabled.
IEEE 1394 (FireWire) support is disabled.
Networking support is enabled.
Radio network interface support is enabled.
Token Ring device support is enabled.
Fast switching is disabled.
Frame Diverter is disabled.
Module version checking is enabled.
/proc filesystem support is enabled.
Maximum physical memory: 1GB
It looks like you have a System V init file setup.
X Windows include files found.
/usr/X11R6/lib/libXpm.so and /usr/include/X11/xpm.h found.
Configuration successful.
rm -f build build-modules
test -f man/pcmcia.5 -a -f debian/rules
umask 022; make DEB_MOD=yes all
make[3]: Entering directory `/usr/src/modules/pcmcia-cs'
/bin/sh: @set: command not found
make[4]: Entering directory `/usr/src/modules/pcmcia-cs/modules'
cc -MD -O2 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c cs.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O2 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c cistpl.c
{standard input}: Assembler messages:
{standard input}:47: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O2 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c rsrc_mgr.c
{standard input}: Assembler messages:
{standard input}:15: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O2 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c bulkmem.c
cc -MD -O2 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c cardbus.c
cc -MD -O2 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c pci_fixup.c
{standard input}: Assembler messages:
{standard input}:17: Warning: Ignoring changed section attributes for .modinfo
ld -r -o pcmcia_core.o cs.o cistpl.o rsrc_mgr.o bulkmem.o cardbus.o pci_fixup.o
chmod -x pcmcia_core.o
cc -MD -O2 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c ds.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O2 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c cb_enabler.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O2 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c i82365.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O2 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c tcic.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
make[4]: Leaving directory `/usr/src/modules/pcmcia-cs/modules'
make[4]: Entering directory `/usr/src/modules/pcmcia-cs/clients'
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c serial_cs.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c memory_cs.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c ftl_cs.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c dummy_cs.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c sram_mtd.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c iflash2_mtd.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c iflash2+_mtd.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c memory_cb.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c serial_cb.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -c -O2 -I../include -I/usr/src/linux/include -D__KERNEL__ -DEXPORT_SYMTAB -DMODVERSIONS -include /usr/src/linux/include/linux/modversions.h -DMODULE -DCARDBUS 3c575_cb.c
/tmp/ccAVXJPh.s: Assembler messages:
/tmp/ccAVXJPh.s:77: Warning: Ignoring changed section attributes for .modinfo
cc -MD -c -O2 -I../include -I/usr/src/linux/include -D__KERNEL__ -DEXPORT_SYMTAB -DMODVERSIONS -include /usr/src/linux/include/linux/modversions.h -DMODULE -DCARDBUS tulip_cb.c
/tmp/ccauJ44C.s: Assembler messages:
/tmp/ccauJ44C.s:108: Warning: Ignoring changed section attributes for .modinfo
cc -MD -c -O2 -I../include -I/usr/src/linux/include -D__KERNEL__ -DEXPORT_SYMTAB -DMODVERSIONS -include /usr/src/linux/include/linux/modversions.h -DMODULE -DCARDBUS epic_cb.c
/tmp/ccqvGC17.s: Assembler messages:
/tmp/ccqvGC17.s:58: Warning: Ignoring changed section attributes for .modinfo
cc -MD -c -O2 -I../include -I/usr/src/linux/include -D__KERNEL__ -DEXPORT_SYMTAB -DMODVERSIONS -include /usr/src/linux/include/linux/modversions.h -DMODULE -DCARDBUS eepro100_cb.c
/tmp/ccGL67WV.s: Assembler messages:
/tmp/ccGL67WV.s:88: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c pcnet_cs.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c 3c589_cs.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c nmclan_cs.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c fmvj18x_cs.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c smc91c92_cs.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c xirc2ps_cs.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c 3c574_cs.c
{standard input}: Assembler messages:
{standard input}:19: Warning: Ignoring changed section attributes for .modinfo
cc -MD -c -O2 -I../include -I/usr/src/linux/include -D__KERNEL__ -DEXPORT_SYMTAB -DMODVERSIONS -include /usr/src/linux/include/linux/modversions.h -DPCMCIA -D__NO_VERSION__ /usr/src/linux/drivers/net/ibmtr.c
cc -c -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE ibmtr_cs.c -o .ibmtr_cs.o
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
ld -r -o ibmtr_cs.o .ibmtr_cs.o ibmtr.o
rm -f .ibmtr_cs.o ; chmod -x ibmtr_cs.o
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c ide_cs.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c parport_cs.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -c -O2 -I../include -I/usr/src/linux/include -D__KERNEL__ -DEXPORT_SYMTAB -DMODVERSIONS -include /usr/src/linux/include/linux/modversions.h -DMODULE /usr/src/linux/drivers/net/8390.c
/tmp/cc4s2Q8O.s: Assembler messages:
/tmp/cc4s2Q8O.s:19: Warning: Ignoring changed section attributes for .modinfo
make[4]: Leaving directory `/usr/src/modules/pcmcia-cs/clients'
make[4]: Entering directory `/usr/src/modules/pcmcia-cs/wireless'
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c netwave_cs.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c wavelan_cs.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c ray_cs.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -c -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -DMODVERSIONS -include /usr/src/linux/include/linux/modversions.h wvlan_hcf.c
cc -MD -c -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -DMODVERSIONS -include /usr/src/linux/include/linux/modversions.h wvlan_hcfio.c
cc -c -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE wvlan_cs.c -o .wvlan_cs.o
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
ld -r -o wvlan_cs.o .wvlan_cs.o wvlan_hcf.o wvlan_hcfio.o
rm -f .wvlan_cs.o ; chmod -x wvlan_cs.o
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c airo_cs.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c airo.c
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
make[4]: Leaving directory `/usr/src/modules/pcmcia-cs/wireless'
make[4]: Entering directory `/usr/src/modules/pcmcia-cs'
make -C clients -f wavelan2_cs.mk all
make[5]: Entering directory `/usr/src/modules/pcmcia-cs/clients'
cc -MD -c -O2 -Wall -Wstrict-prototypes -Winline -pipe -D__KERNEL__ -DMODULE -I../include -I/usr/src/linux/include -I/usr/src/linux wavelan2_cs.c -o .wavelan2_cs.o
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for .modinfo
ld -r -o wavelan2_cs.o .wavelan2_cs.o -L../lib -lhcf-i386
rm -f .wavelan2_cs.o ; chmod -x wavelan2_cs.o
make[5]: Leaving directory `/usr/src/modules/pcmcia-cs/clients'
make[4]: Leaving directory `/usr/src/modules/pcmcia-cs'
make[3]: Leaving directory `/usr/src/modules/pcmcia-cs'
touch build-modules
test -f man/pcmcia.5 -a -f debian/rules
rm -f -r debian/tmp-modules
install -d debian/tmp-modules debian/tmp-modules/DEBIAN
KSRC="/usr/src/linux" KVERS="2.2.19" KDREV="pathlab.1.0" \
sh -v debian/setvers.sh
#!/bin/sh
# setvers.sh - extract version numbers from the changelog and kernel
# source and build the control file and prerm script for the
# pcmcia-modules package
# KSRC is expected to be passed through the environment
set -e
umask 022
# define some sed scripts for extracting the upstream version number
# and Debian revision number from a Debian changelog
pc_vers_sed='
/#define CS_RELEASE "\(.*\)"/{
s//\1/p
q
}'
up_vers_sed='
1{
s/^[^(]*(//
s/)[^)]*$//
/-[A-Za-z0-9.+]*$/{
s///
b enddeb
}
/-/q
:enddeb
/^[A-Za-z0-9.+:-]\{1,\}$/p
q
}'
deb_rev_sed='
1{
s/^[^(]*(//
s/)[^)]*$//
s/^.*-\([A-Za-z0-9.+]*\)$/\1/p
q
}'
test "$KVERS" || \
KVERS=`sed -ne '/UTS_RELEASE=/{
s///
p
q
}' config.mk`
# extract the upstream version number and debian revision number
UPVERS=`sed -ne "$pc_vers_sed" include/pcmcia/version.h`
sed -ne "$pc_vers_sed" include/pcmcia/version.h
DEBREV=`sed -ne "$deb_rev_sed" debian/changelog`
sed -ne "$deb_rev_sed" debian/changelog
NEXTVERS=${UPVERS%.*}.`expr ${UPVERS##*.} + 1`
expr ${UPVERS##*.} + 1
# determine the version numbers for the kernel source
# use a Debian changelog if it exists, otherwise use the kernel version
# number determined by the PCMCIA configure script
if [ "$KDREV" ]; then
case "$KDREV" in
*-*) KDEBREV=${KDREV##*-} ;;
*) KDEBREV="" ;;
esac
KVERSDEB=${KDREV%-*}
elif test -r "$KSRC/debian/changelog"; then
KDEBREV=`sed -ne "$deb_rev_sed" "$KSRC/debian/changelog"`
KVERSDEB=`sed -ne "$up_vers_sed" "$KSRC/debian/changelog"`
else
KDEBREV=""
KVERSDEB="$KVERS"
fi
# remove the epoch number (if any)
KVERSDEBNE="${KVERSDEB##*:}"
# test whether we have successfully determined the version numbers
test "$KVERS" -a "$UPVERS" -a "$DEBREV" || exit 1
echo "$KVERS" > debian/KVERS
if [ "${KVERS%-*}" = "$KVERSDEBNE" ]; then
MODVERS="$UPVERS-${DEBREV}${KDEBREV:+k$KDEBREV}"
else
MODVERS="$UPVERS-${DEBREV}+"`echo "$KVERSDEBNE" | tr - +`${KDEBREV:+"+$KDEBREV"}
fi
echo "$KVERSDEBNE" | tr - +
echo "$MODVERS" > debian/MODVERS
# Generate a correct control file and prerm script for the modules package
for script in preinst postinst prerm; do
sed -e 's/\${kvers}/'"$KVERS"'/g
s/\${kversdeb}/'"$KVERSDEB"'/g' \
debian/$script-modules.in > debian/tmp-modules/DEBIAN/$script
chmod +x debian/tmp-modules/DEBIAN/$script
done
cat debian/control-source > debian/control.tmp
if [ "${KVERS%-*}" = "$KVERSDEBNE" -a "$KDEBREV" ]; then
sed -e 's/\${kvers}/'"$KVERS"'/g' debian/control-modules | \
tee -a debian/control >> debian/control.tmp
else
sed -e 's/\${kvers}/'"$KVERS"'/g' debian/control-modules | \
sed -e 's/Depends: kernel-image[^)]*),/Depends:/' | \
tee -a debian/control >> debian/control.tmp
fi
dpkg-gencontrol -Vkversdeb="$KVERSDEB${KDEBREV:+-$KDEBREV}" -v"$MODVERS" \
-Vcurvers="$UPVERS" -Vnextvers="$NEXTVERS" \
-p"pcmcia-modules-$KVERS" -Pdebian/tmp-modules \
-cdebian/control.tmp
exit 0
install -d "debian/tmp-modules/usr/share/doc/pcmcia-modules-`cat debian/KVERS`"
umask 022; make \
DEB_MOD=yes PREFIX=`pwd`/debian/tmp-modules install
make[3]: Entering directory `/usr/src/modules/pcmcia-cs'
/bin/sh: @set: command not found
make[4]: Entering directory `/usr/src/modules/pcmcia-cs/modules'
cp pcmcia_core.o ds.o cb_enabler.o i82365.o tcic.o /usr/src/modules/pcmcia-cs/debian/tmp-modules/lib/modules/2.2.19/pcmcia
make[4]: Leaving directory `/usr/src/modules/pcmcia-cs/modules'
make[4]: Entering directory `/usr/src/modules/pcmcia-cs/clients'
cp serial_cs.o memory_cs.o ftl_cs.o dummy_cs.o sram_mtd.o iflash2_mtd.o iflash2+_mtd.o memory_cb.o serial_cb.o 3c575_cb.o tulip_cb.o epic_cb.o eepro100_cb.o pcnet_cs.o 3c589_cs.o nmclan_cs.o fmvj18x_cs.o smc91c92_cs.o xirc2ps_cs.o 3c574_cs.o ibmtr_cs.o ide_cs.o parport_cs.o /usr/src/modules/pcmcia-cs/debian/tmp-modules/lib/modules/2.2.19/pcmcia
cp 8390.o /usr/src/modules/pcmcia-cs/debian/tmp-modules/lib/modules/2.2.19/pcmcia
make[4]: Leaving directory `/usr/src/modules/pcmcia-cs/clients'
make[4]: Entering directory `/usr/src/modules/pcmcia-cs/wireless'
cp netwave_cs.o wavelan_cs.o ray_cs.o wvlan_cs.o airo_cs.o airo.o /usr/src/modules/pcmcia-cs/debian/tmp-modules/lib/modules/2.2.19/pcmcia
make[4]: Leaving directory `/usr/src/modules/pcmcia-cs/wireless'
make[4]: Entering directory `/usr/src/modules/pcmcia-cs'
make -C clients install-modules MODULES=wavelan2_cs.o
make[5]: Entering directory `/usr/src/modules/pcmcia-cs/clients'
cp wavelan2_cs.o /usr/src/modules/pcmcia-cs/debian/tmp-modules/lib/modules/2.2.19/pcmcia
make[5]: Leaving directory `/usr/src/modules/pcmcia-cs/clients'
make -C man install-man4 MAN4=wavelan2_cs.4
make[5]: Entering directory `/usr/src/modules/pcmcia-cs/man'
cp *.4 /usr/src/modules/pcmcia-cs/debian/tmp-modules/usr/share/man/man4
make[5]: Leaving directory `/usr/src/modules/pcmcia-cs/man'
make -C etc -f wavelan2_cs.mk install
make[5]: Entering directory `/usr/src/modules/pcmcia-cs/etc'
grep -q wavelan2 /usr/src/modules/pcmcia-cs/debian/tmp-modules/etc/pcmcia/config || \
patch -s /usr/src/modules/pcmcia-cs/debian/tmp-modules/etc/pcmcia/config wavelan2_cs.patch
grep: /usr/src/modules/pcmcia-cs/debian/tmp-modules/etc/pcmcia/config: No such file or directory
patch: **** Can't find file /usr/src/modules/pcmcia-cs/debian/tmp-modules/etc/pcmcia/config : No such file or directory
make[5]: *** [install] Error 2
make[5]: Leaving directory `/usr/src/modules/pcmcia-cs/etc'
make[4]: *** [install] Error 2
make[4]: Leaving directory `/usr/src/modules/pcmcia-cs'
make[3]: *** [install] Error 2
make[3]: Leaving directory `/usr/src/modules/pcmcia-cs'
make[2]: *** [binary-modules] Error 2
make[2]: Leaving directory `/usr/src/modules/pcmcia-cs'
make[1]: *** [kdist_image] Error 2
make[1]: Leaving directory `/usr/src/modules/pcmcia-cs'
Module /usr/src/modules/pcmcia-cs failed.
Hit return to Continue
koladvip:/usr/src/linux#
Reply to: