Re: Selfmade-Kernel 2.4.5 will not boot on Athlon1333+ASUSA7V133 System
On Mon, 18 Jun 2001, Christoph Stahl wrote:
> I made an entry in lilo-conf to boot my selfmade image (750K), fine.
> But the kernel hangs up directly after the "booting kernel.." message.
> I guess its because of some kernel-options-misconfiguration, specific
> to my cpu/mainboard.
I have a ASUS A7V100 board and my drive is connected to the PDC ATA100
controller (hde). To boot from that I had to give these settings to lilo
boot=/dev/hde
# Specifies the device that should be mounted as root. (`/')
#
root=/dev/hde3
disk=/dev/hde
bios=0x80
I also have a custom compiled kernel. Please mail me if you require my
config
raj
Reply to: