Re: Setting up USB under 2.4
Hey,
You have enabled 'CONFIG_USB_DEVICEFS' haven't you? Also, if you have VIA
chipset (that's what I have), make sure you're using 'usb-uhci.o', *not*
'uhci.o'
Cameron Matheson
On Thu, May 24, 2001 at 07:27:37PM +0200, Raffaele Sandrini wrote:
> Hi all
>
> I have a USB Modem. Now i have enabled USB in the 2.4 kernel as module.
>
> I have enable the core and the uhci (i have a Via chip) hub driver. I have also enabled the acm (modem) module.
>
> After i have insereted all these modules i got the message that the driver has detected the hub and the modem. But the modem isn't enabled, i mean i gets no power.
>
> And the directory /proc/bus/usb exists but is empty (i have enabled it in the kernel).
>
> I have testet it under windows -- its working :-((
>
> Do you have any hints of getting it really working?
>
> cheers,
> Raffaele
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Reply to: