Re: tulip.o

[Dan Christensen <jdc@uwo.ca>]

Jack <ifup@yifan.net> writes:

> Here is my problem with the Linksys NIC:
> 
>   . I have two NICs:  Linksys EtherFast 10/100 and Intel 10/100
>   . Using 2.4.3 Kernel and have tulip.o module compiled in it.
>   . The Interl NIC is detected as eth0 (btw,  did I compile any support
>     for that card?  I dont think so.  it's a integrated NIC)
>   . Linksys NIC is not detected at the boot time.  But can be brought up
>     by insmod into eth1.
> 
> My solusion for this:
> 
>   - Have a script which insmod tulip and have it called in
>     /etc/network/interface,  just after eth0 is up before eth1 settings.

List the needed module in /etc/modules, which tells the kernel 
which modules to load at boot time.

Dan