Re: 320X240

[Ilya Martynov <m_ilya@agava.com>]

OD> hi ilya,
>> You need agpgart module if you want normal resolutions to work on
>> i810. It should be in latest versions of 2.2.x kernel (I use 2.2.18
>> and it does there) or 2.4.xx. Once you should load compiled agpgart
>> module before starting X. You can also compile DRI support module if
>> you wan fast 3d (but it is optional).

OD> i downloaded the driver from the intel site and compiled it.
OD> insmod returns:

OD> agp_gart: no supportet devices found
OD> agpgart.o: device or recource busy
OD> Hint:this error can be caused by incorrect module parameters ,including
OD> invalid io
OD> or irq parameters

OD> ... but i think it cant be a invalid io or irq cause ,or ???

Don't really know what's wrong with it. I've installed agpgart module
that came with 2.2.18 kernel - I've not tried version from intel site
so I know nothing about its configuration. I've just selected in
kernel configuration compilation of agpgard module with i810
support. Check docs for driver you have downloaded from intel. If you
can't find anything there try to download 2.2.18 or 2.2.19 kernel and
compile agpgart with it. If you are using 2.4.xx kernel agpgart module
also should be in it.

P.S. Also try to 'depmod -a' and then 'modprobe agpgart' instead
'insmod agpgart'. Maybe it just requires some other module to load.

-- 
 -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
| Ilya Martynov (http://martynov.org/)                                    |
| GnuPG 1024D/323BDEE6 D7F7 561E 4C1D 8A15 8E80  E4AE BE1A 53EB 323B DEE6 |
| AGAVA Software Company (http://www.agava.com/)                          |
 -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-