Re: i810 woes... please help!
Hi Alvin,
I am aware of the XF86Com_i810 driver but I have read in several places that
this is only needed with XFree86 3.3.5.
Apparently though, XFree86 3.3.6 has i810 support built in (certainly the
-showconfig option lists the i810).
Cheers for the help though!
Any other ideas?
Phil
------Original Message------
From: Alvin Oga <aoga@Mail.Linux-Consulting.com>
To: Phil Moore <philip.moore@techie.com>
Sent: April 14, 2001 3:47:39 AM GMT
Subject: Re: i810 woes... please help!
hi phil
you need to be using XFCom_i810 driver ...
XFCom_i810 -probeonly should give you info you need to check into
i think XFree-4.x recognizes the i810 driver by default
( easier, better if you are having problems...
if you need a working XF86Config you can poke around and edit mine...
- be sure to have a genericly support SVGA monitor if you copy other
peoples XFConfig
- be sure the insmod lists agpgart as an installed module
http://www.Linux-1U.net/MotherBoard/
XF86Config.Debian-2.2
have fun
alvin
On Fri, 13 Apr 2001, Phil Moore wrote:
> Hi,
>
> I am running Debian Potato with kernel 2.2.18 and XFree86 3.3.6 on an
Intel
> 810 chipset.
>
> I have installed the correct Xserver (SVGA) and the kernel module
agpgart.o
> as per the instructions given on the Intel website and elsewhere.
>
> I have edited my XF86Config file to have an "i810" device section, and a
> screen section for a 640x480 display, following the Intel instructions
> again.
> When I set the X software link to point ot the SVGA xserver I get the
> following error:
>
> (**) XKB: rules: "xfree86"
> (**) XKB: model: "pc101"
> (**) XKB: layout: "gb"
> (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
> (**) Mouse: buttons: 3
> (**) SVGA: Graphics device ID: "i810"
> (**) SVGA: Monitor ID: "Primary Monitor"
> (--) SVGA: Mode "320x240" needs hsync freq of 62.98 kHz. Deleted.
> (**) FontPath set to
>
"/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/cyrillic:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/cyrillic,/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/75dpi"
> (--) SVGA: PCI: Intel Unknown chipset (0x7121) rev 2, Memory @ 0xe8000000,
> 0xeff80000
> (--) SVGA: error doing ioctl(GARTIOCINFO): Invalid argument
>
> In XF86Setup I am selecting "probed" for all the SVGA settings because the
> i810 does not appear in any of the lists.
>
> Please can you help me solve this - all the online guides say it should
work
> now and none of them mention this error!
>
> Cheers!
> Phil
>
>
> ______________________________________________
> FREE Personalized Email at Mail.com
> Sign up at http://www.mail.com/?sr=signup
>
>
> --
> To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org
>
--
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org ¶ º úP
______________________________________________
FREE Personalized Email at Mail.com
Sign up at http://www.mail.com/?sr=signup
Reply to: