X install/setup problems
Hi,
I'm having problems trying to get x setup. I loaded the default xdm and
twm and the gnome stuff on install. Since then I installed gdm. I'm
currently using helix gnome on another box that is identical but running
SuSE 6.4. I like this okay and I think it is using sawfish for window
manager?
Here is some info. xviddetect reporte The XFree86 server for S3 Inc.
VirGE/MX is s3v. I tried this one and had no luck so I'm currently try
XF86_SVGA so I did an apt-get install xserver-svga.
I'm running potato r2 with xfree 3.3.6-11potato15
Here is the output from the startx script. Any help would be
appreciated.
Eric :-)
XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.14-va.4.4-i586 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 1):
NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256,
GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i,
ET4000W32i_rev_b,
ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1,
wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128,
ati,
sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597,
sis5598, sis6326, sis530, sis620, sis300, sis630, sis540,
tvga8200lx,
tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000,
tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420,
tgui9420dgi,
tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d,
cyberblade,
clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429,
clgd5430,
clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464,
clgd5465,
clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542,
clgd7543,
clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga,
mga2064w,
mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400,
oti067,
oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302,
ali2308,
ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl,
ark1000pv,
ark2000pv, ark2000mt, mx, realtek, s3_savage, s3_virge, AP6422,
AT24,
AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200,
ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740,
i740_pci,
i810, i810-dc100, i810e, Voodoo Banshee, Voodoo3, smi, generic
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
glx.so: Unknown error loading module
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc104"
(**) Mouse: type: ps/2, device: /dev/psaux, buttons: 3
(**) SVGA: Monitor ID: "Primary-Monitor"
(--) SVGA: Mode "640x480" needs hsync freq of 31.47 kHz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 35.40 kHz. Deleted.
(**) SVGA: Graphics device ID: "Primary-Card"
Warning: The directory "/usr/X11R6/lib/X11/fonts/URW" does not exist.
Entry deleted from font path.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi"
(--) SVGA: PCI: S3 ViRGE/MX rev 6, Memory @ 0xc0000000
(--) SVGA: S3V: ViRGE/MX rev 6, Linear FB @ 0xc0000000
(--) SVGA: Detected S3 ViRGE/MX
(--) SVGA: using driver for chipset "s3_virge"
(--) SVGA: videoram: 4096k
(--) SVGA: Ramdac speed: 135 MHz
(--) SVGA: assuming RefCLK value of 14.318 MHz
(--) SVGA: Detected current MCLK value of 83.045 MHz
(--) SVGA: LCD size 1024x768, clock 65.028 MHz
(--) SVGA: chipset: s3_virge
(--) SVGA: videoram: 4096k
(**) SVGA: Using 16 bpp, Depth 16, Color weight: 565
(--) SVGA: Maximum allowed dot-clock: 135.000 MHz
(**) SVGA: Mode "1024x768": mode clock = 74.500
(--) SVGA: Virtual resolution set to 1024x768
(--) SVGA: s3_virge: Using hardware cursor
restarting S3 graphics engine reset 1 ...
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 pattern fill
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: CPU to screen color expansion (bitmap, TE/NonTE
imagetext, TE/NonTE polytext)
(--) SVGA: XAA: Using 8 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and non-transparent stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments
(**) Adding extended device "SWITCH" (type: Switch)
restarting S3 graphics engine reset 1 ...
restarting S3 graphics engine reset 1 ...
xinit: connection to X server lost.
waiting for X server to shut down restarting S3 graphics engine reset 1
...
Reply to: