Re: Printer not printing
Keith, Brian
I have Epson 740 up and running with 360x360, 720x720, and 1440x720
resolutions. I use "enscript" and "ghostscript" to print. I
have a all the necessary "printtab", "print filters", and a simple
install script.
Send me a email if you want this information.
-=[cwa]=-
--
Christopher W. Aiken
Scenery Hill, Pa, USA
chris at cwaiken dot com
www.cwaiken.com
Debian GNU/Linux 2.2_r2
On Mon, 26 Feb 2001, Keith G. Murphy wrote:
->
->
->Brian S Enyart wrote:
->>
->> I've got an Epson 740 I've set up with magicfilter.
->>
->> When I attempt to print a file (user or root), the job queues up
->> normally, then disappears as if it had been printed, but it hasn't been!
->> I get no error messages, and if I ask lpr to send email on completion,
->> I get an email indication successful completion. I also get no in any
->> of the log files.
->>
->> When I first try to print, several modules get loaded:
->> parport, lp, parport_pc, and parport-probe
->>
->> My /etc/printcap (without comments):
->>
->> |lpep740|Epson 740|lp:\
->> :lp=/dev/lp0:sd=/var/spool/lpd/ep740:\
->> :sh:pw#80:pl#66:px#1440:mx#0:\
->> :if=/etc/magicfilter/StylusColor-740@360dpi-filter:\
->> :af=/var/log/lp-acct:lf=/var/log/lp-errs:
->>
->Where did you get the StylusColor-740 magicfilter from? I haven't seen
->that in the Debian distribution. What driver does it end up using?
->I've never gotten stcolor to work with my 740, but stp does.
->
->You might want to check out www.linuxprinting.org for further info.
->
->Also, are you dual-booting? I've found that Win95 bollixes up the
->printer, such that nothing but a hard reset (unplug/plug in) can get it
->working under Linux again.
->
->
->--
->To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
->with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
->
->
Reply to: