Fw: HP 9100 series cd -writer?
----- Original Message -----
From: "virtanen" <hvirtane@cc.jyu.fi>
To: "Hall Stevenson" <hallstevenson@mindspring.com>
Cc: "Debian User List" <debian-user@lists.debian.org>
Sent: Wednesday, February 07, 2001 11:33 AM
Subject: Re: HP 9100 series cd -writer?
> Didn't find any clue yet, what to do.
> Still nothing happens.
> For most of the time 'xcdroast' command is
> answering:
>
> 'No Generic SCSI-Support has been detected.'
> (Anyway there are the modules sg and ide-sci emulation installed.)
>
> From dmesg:
> ___________
>
> hdc: Hewlett-Packard CD-Writer Plus 9100b, ATAPI CDROM drive
> hdd: CD-ROM 48X/AKU, ATAPI CDROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: IBM-DTLA-307030, 29314MB w/1916kB Cache, CHS=3737/255/63
> hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache
> Uniform CD-ROM driver Revision: 3.11
> hdd: ATAPI 48X CD-ROM drive, 128kB Cache
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
> scsi: <fdomain> Detection failed (no card)
> NCR53c406a: no available ports found
> sym53c416.c: Version 1.0.0
> Failed initialization of WD-7000 SCSI card!
> IBM MCA SCSI: No Microchannel-bus support present -> Aborting.
> megaraid: v107 (December 22, 1999)
> aec671x_detect:
> 3w-xxxx: tw_findcards(): No cards found.
> scsi : 0 hosts.
> scsi : detected total.
> Partition check:
>
> ___________
>
> /etc/modules is as follows:
>
> eepro100
> 3c59x
> 3c59x
> parport
> parport_pc
> parport_probe
> sg
> ide-scsi
>
> _______________
>
> hvirtane@cc.jyu.fi
>
>
> On Wed, 7 Feb 2001, Hall Stevenson wrote:
>
> > > 1)
> > > Has anyone succesfully used
> > >
> > > HP cd-writer 9100i (IDE)
> >
> > I have the 9150i model... probably close enough.
> >
> >
> > > xcdroast
> > > Debian 2.2. (potato)
> > >
> > > combined to burn cds?
> > >
> > > My brand new machine has got the above combination
> > > and I cannot setup xcdroast. xcdroast setup doesn't
> > > seem to see the cdwriter as a writer at all.
> > >
> > > On the kernel there are installed ide-sci and sg modules
> > > Any clue, where the problem is?
> > > _______________
> > >
> > > 2) How to use instead cdrecord program (if xcdroast
> > > doesn't work) to copy cds?
> > >
> > > My burner is /dev/hdc and there is another cddriver
> > > at /dev/hdd
> >
> > Sounds like it's a scsi-emulation problem. There's likely nothing
wrong
> > with your cd-writer or the software you're using. xcdroast, I
believe,
> > uses cdrecord on the back-end, so if xcdroast doesn't work, cdrecord
> > probably won't either.
> >
> > This link, http://www.xcdroast.org/xcdr098/faq-a8.html#2, may help
you
> > out.
> >
> > Regards
> > Hall
>
>
Reply to: