Re: ethernet after reboot n/a
On Sat, 27 Jan 2001 15:37:13 EST, Vinod Kurup writes:
>On Sat, Jan 27, 2001 at 08:03:50PM +0100, Robert Waldner wrote:
>> eth2: VIA VT3043 Rhine at 0xd800, 00:80:c8:e4:83:e9, IRQ 9.
>> eth2: MII PHY found at address 8, status 0x782d advertising 05e1 Link 0000.
>>
>> bash-2.03# ifconfig eth2 192.168.1.1/24 up
>> SIOCSIFFLAGS: Resource temporarily unavailable
>> SIOCSIFFLAGS: Resource temporarily unavailable
>
>This is often the sign of an IRQ conflict... Did any of the
>new hardware that you installed use IRQ 9? Check /proc/interrupts
Geez, you´re right.
I hadn´t thought of this because I didn´t install any new hardware, I
just swapped gfx- and SCSI-card in their PCI-slots.
I´ve now set specific IRQs for every PCI-slot in the BIOS and
everything´s back to normal.
tnx!
cheers,
&rw
--
/ Ing. Robert Waldner | Network Engineer | T: +43 1 89933 F: x533 \
\ <Waldner@KPNQwest.at> | KPNQwest/AT | Diefenbachg. 35, A-1150 /
Reply to: