question about CD-R cdrecord/cdwrite
Hi,
I found you've answered in debian news on problems with cd-r.
I hope you can help me. My name is Valentine, I've tryied to write
a CD on IOMEGA CD-R. SCSI emulation was fine and I can mount
other CD's on /dev/scd0, but when I'm trying to either cdrecord
or cdwrite program, they are failed. Any suggestions I would appreciate.
Thanks in advance,
Valentine.
----- OUTPUT
[root@d0lxnd01 vkuznet]# cdrecord -v -isosize speed=3D4 dev=3D0,0 /home/vku=
znet/cdimage.iso
Cdrecord 1.8 (i686-pc-linux-gnu) Copyright (C) 1995-2000 J=F6rg Schilling
TOC Type: 1 =3D CD-ROM
scsidev: '0,0'
scsibus: 0 target: 0 lun: 0
Using libscg version 'schily-0.1'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'IOMEGA '
Identifikation : 'ZIPCD1024INT-A '
Revision : ' 1.1'
Device seems to be: Generic mmc CD-RW.
Driver flags : SWABAUDIO
Drive buf size : 1572864 =3D 1536 KB
FIFO size : 4194304 =3D 4096 KB
Track 01: data 590 MB
Total size: 678 MB (67:11.33) =3D 302350 sectors
Lout start: 678 MB (67:13/25) =3D 302350 sectors
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable erro=
r
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 13 00 00 00 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cdrecord: No disk / Wrong disk!
[root@d0lxnd01 vkuznet]# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IOMEGA Model: ZIPCD1024INT-A Rev: 1.1
Type: CD-ROM ANSI SCSI revision: 02
[root@d0lxnd01 vkuznet]# cdwrite -ev --device /dev/scd0 -s 4 /home/vkuznet/=
cdimage.iso
cdwrite 2.0
Track 01: data 590 Mb
opening scsi device: Read-only file system
[root@d0lxnd01 vkuznet]# =20
[vkuznet@d0lxnd01 vkuznet]$ ls -l /dev/scd0
brw-rw---- 1 root disk 11, 0 May 5 1998 /dev/scd0
[vkuznet@d0lxnd01 vkuznet]$=20
Reply to: