Re: isdn: what I've to do??
> On Fri, Oct 20, 2000 at 09:03:39PM +0200, Shaul Karl wrote:
> > >.....
> >
> > I do not follow. What message you do not have now? How come it disappeared?
> >
>
> Ok, I'll try to be more precise. I've an hfc pci card and in
> modules.conf I have:
>
> options hisax type=35 id=isdn protocol=2
> alias ippp0 isdn
> alias char-major-43 hisax
> alias char-major-44 hisax
> alias char-major-45 hisax
>
> euro protocol cause I'm in Italy. When i load the module I have:
>
> Oct 21 01:40:28 localhost kernel: ISDN subsystem Rev: 1.100/1.84/1.114/1.63/none/1.4 loaded
> Oct 21 01:40:28 localhost kernel: HiSax: Linux Driver for passive ISDN cards
> Oct 21 01:40:28 localhost kernel: HiSax: Version 3.3e (module)
> Oct 21 01:40:28 localhost kernel: HiSax: Layer1 Revision 2.37
> Oct 21 01:40:28 localhost kernel: HiSax: Layer2 Revision 2.20
> Oct 21 01:40:28 localhost kernel: HiSax: TeiMgr Revision 2.13
> Oct 21 01:40:28 localhost kernel: HiSax: Layer3 Revision 2.10
> Oct 21 01:40:28 localhost kernel: HiSax: LinkLayer Revision 2.40
> Oct 21 01:40:28 localhost kernel: HiSax: Approval certification valid
> Oct 21 01:40:28 localhost kernel: HiSax: Approved with ELSA Quickstep series cards
> Oct 21 01:40:28 localhost kernel: HiSax: Approval registration numbers:
> Oct 21 01:40:28 localhost kernel: HiSax: German D133361J CETECOM ICT Services GmbH
> Oct 21 01:40:28 localhost kernel: HiSax: EU (D133362J) CETECOM ICT Services GmbHOct 21 01:40:28 localhost kernel: HiSax: Approved with Eicon Technology Diva 2.01 PCI cards
> Oct 21 01:40:28 localhost kernel: HiSax: Card 1 Protocol EDSS1 Id=isdn (0)
> Oct 21 01:40:28 localhost kernel: HiSax: HFC-PCI driver Rev. 1.27
> Oct 21 01:40:28 localhost kernel: HiSax: HFC-PCI card manufacturer: CCD/Billion/Asuscom card name: 2BD0
> Oct 21 01:40:28 localhost kernel: HFC-PCI: defined at mem 0xc2824000 fifo 0xc1398000(0x1398000) IRQ 10 HZ 100
> Oct 21 01:40:28 localhost kernel: HFC_PCI: resetting card
> Oct 21 01:40:28 localhost kernel: HFC 2BDS0 PCI: IRQ 10 count 410
> Oct 21 01:40:29 localhost kernel: HFC 2BDS0 PCI: IRQ 10 count 445
> Oct 21 01:40:29 localhost kernel: HiSax: DSS1 Rev. 2.23
> Oct 21 01:40:29 localhost kernel: HiSax: 2 channels added
> Oct 21 01:40:29 localhost kernel: HiSax: MAX_WAITING_CALLS added
>
Seems good so far. I have those also with what seems to me obvious differences
due to different HW.
> I configure isdn with the prepared script that came with debian
> isdnutils package and those that are generate by isdnconfig utilities
> (and modified by hand).
>
> Now the problem is that the card do not compose number at all.
>
What do you mean? What are you getting after issuing:
isdnctrl dial ippp0
I would also try using minicom and some ttyI just to see that I can reach my
ISP.
> The worst is that all seems ok: ipppd start with option auto, but when
> I try to go out in message I can see only outgoing request but no
> action (modem do not work). Is it a problem to have a firewall
> masqerating? do I need a special setup?
>
I would enable the debug option in /etc/isdn/ipppd.ippp0 and change
/etc/syslog.conf accordingly and watch the debugging messages (I do not recall
how those messages are divided between /var/log/syslog, /var/log/messages and
/var/log/debug).
The firewall can certainly get in the way but I believe those debug messages
can help revealing the problems.
In addition to the your init messages I have:
Script started on Sat Oct 21 08:56:05 2000
[08:56:06 /tmp]$ grep -A15 MAX_WAITING_CALLS /var/log/messages.0
Oct 16 07:39:24 rakefet kernel: HiSax: MAX_WAITING_CALLS added
Oct 16 07:39:25 rakefet kernel: isdn: Verbose-Level is 2
Oct 16 07:39:25 rakefet ipppd: info: no CHAP secret entry for this user!
Oct 16 07:39:25 rakefet ipppd[220]: Found 1 device: /dev/ippp0
Oct 16 07:39:25 rakefet ipppd[222]: ipppd i2.2.10 (isdn4linux version of pppd
by MH) started
Oct 16 07:39:25 rakefet ipppd[222]: init_unit: 0
Oct 16 07:39:25 rakefet ipppd[222]: Connect[0]: /dev/ippp0, fd: 8
Oct 16 07:39:30 rakefet kernel: ippp0: dialing 0 7251111...
Oct 16 07:39:31 rakefet lpd[230]: restarted
Oct 16 07:39:31 rakefet ipppd[222]: Local number: 35298903, Remote number:
9277777, Type: outgoing
Oct 16 07:39:31 rakefet ipppd[222]: PHASE_WAIT -> PHASE_ESTABLISHED, ifunit:
0, linkunit: 0, fd: 8
Oct 16 07:39:31 rakefet kernel: isdn_net: ippp0 connected
Oct 16 07:39:32 rakefet ipppd[222]: Remote message:
Oct 16 07:39:32 rakefet ipppd[222]: MPPP negotiation, He: No We: No
Oct 16 07:39:32 rakefet ipppd[222]: local IP address 212.179.144.29
Oct 16 07:39:32 rakefet ipppd[222]: remote IP address 212.25.92.5
[08:56:08 /tmp]$ exit
exit
Script done on Sat Oct 21 08:56:10 2000
Note that I am issuing the isdnctrl dial from /etc/init.d/isdnutils. I have
what seems to me a slight problem with my addition to the init script but, as
you can see, it seems to work.
I also have some related messages in /var/log/debug.0
> > > > >
> > > > > Yes! I do it.
> > > > >
> > > >
> > > >
> > > > What does lsmod have to say?
> > > > [00:01:27 /tmp]$ /sbin/lsmod
> > > > Module Size Used by
> > > > floppy 44800 0 (autoclean)
> > > > nls_cp437 3904 0 (autoclean)
> > > > isofs 17488 0 (autoclean)
> > > > hisax 129840 2 (autoclean)
> > > > isdn 108496 3 (autoclean) [hisax]
> > > > slhc 4320 1 (autoclean) [isdn]
> > > > ne 6320 1 (autoclean)
> > > > 8390 6080 0 (autoclean) [ne]
> > > > serial 18080 3 (autoclean)
> > > > [00:01:29 /tmp]$
> > >
> > > slhc is not loaded:
> > > Module Size Used by
> > > hisax 118840 2 (autoclean)
> > > isdn 81984 2 (autoclean) [hisax]
> > >
> > > What I've to put in modules.conf ? (and what is it slhc: modinfo, give
> > > me no description)
> > >
> >
> >
> > I am not sure its a modules.conf matter. Do you have this module?
> >
> > [20:47:58 /tmp]$ ls /lib/modules/2.2.17/net/slhc.o
> > /lib/modules/2.2.17/net/slhc.o
> > [20:49:01 /tmp]$
> >
> >
> >
> > > what's "fun": this morning I call a phone with this card, now it
> > > doesn't work! and I'm sure I've no touch configuration other than
> > > number of outgoing call
> > >
> >
> >
> > Perhaps the device is locked or has itself occupied with another process? This
> > would also explain why you do not now get the message from above. Have you
> > tried restarting the ISDN sub unit (/etc/init.d/isdnutils restart)? What are
> > /var/log/syslog and /var/log/messages related messages? Have you configured
> > ippp with debug?
> >
> >
> > > the isdn relative kernel configuration should be ok:
> > > CONFIG_ISDN=m
> > > CONFIG_ISDN_PPP=y
> > > # CONFIG_ISDN_PPP_VJ is not set
> > > # CONFIG_ISDN_MPP is not set
> > > # CONFIG_ISDN_AUDIO is not set
> > >
> > > #
> > > # ISDN feature submodules
> > > #
> > > # CONFIG_ISDN_DRV_LOOP is not set
> > > # CONFIG_ISDN_DIVERSION is not set
> > >
> > > #
> > > # Passive ISDN cards
> > > #
> > > CONFIG_ISDN_DRV_HISAX=m
> > > CONFIG_HISAX_EURO=y
> > > # CONFIG_DE_AOC is not set
> > > # CONFIG_HISAX_NO_SENDCOMPLETE is not set
> > > # CONFIG_HISAX_NO_LLC is not set
> > > # CONFIG_HISAX_NO_KEYPAD is not set
> > > <snip other card not setted>
> > > CONFIG_HISAX_HFC_PCI=y
> > >
> > > #
> > > # Active ISDN cards
> > > <no one>
> > >
> > >
> > > network device:
> > > CONFIG_PPP=m
> > > CONFIG_SLIP=m
> > > CONFIG_SLIP_COMPRESSED=y
> > > CONFIG_SLIP_SMART=y
> > >
> > >
> >
> >
> > I do not remember where slhc comes from but I believe the kernel config help
> > text mentions this. In any case:
> >
> > [20:54:13 /tmp]$ grep ISDN /boot/config-2.2.17
> > # ISDN subsystem
> > CONFIG_ISDN=m
> > CONFIG_ISDN_PPP=y
> > CONFIG_ISDN_PPP_VJ=y
> > CONFIG_ISDN_MPP=y
> > CONFIG_ISDN_AUDIO=y
> > CONFIG_ISDN_TTY_FAX=y
> > # ISDN feature submodules
> > # CONFIG_ISDN_DRV_LOOP is not set
> > # CONFIG_ISDN_DIVERSION is not set
> > # Passive ISDN cards
> > CONFIG_ISDN_DRV_HISAX=m
> > # Active ISDN cards
> > # CONFIG_ISDN_DRV_ICN is not set
> > # CONFIG_ISDN_DRV_PCBIT is not set
> > # CONFIG_ISDN_DRV_SC is not set
> > # CONFIG_ISDN_DRV_ACT2000 is not set
> > # CONFIG_ISDN_DRV_EICON is not set
> > # CONFIG_ISDN_DRV_AVMB1 is not set
> > [20:55:17 /tmp]$ grep SLIP /boot/config-2.2.17
> > CONFIG_SLIP=m
> > CONFIG_SLIP_COMPRESSED=y
> > CONFIG_SLIP_SMART=y
> > # CONFIG_SLIP_MODE_SLIP6 is not set
> > CONFIG_PPP=m
> > # CONFIG_SYNCLINK_SYNCPPP is not set
> > CONFIG_ISDN_PPP=y
> > CONFIG_ISDN_PPP_VJ=y
> > [20:55:58 /tmp]$
> >
> >
> > > >
> > > >
> > > >
> > > > > I'm not subscribed to this list, please cc to me at
> > > > > cruciani@cli.di.unipi.it
> > > > > Thank
> > > > >
> > > > > Daniele.
> > > > >
> > > > > --
> > > > > Daniele Cruciani <cruciani@cli.di.unipi.it>
> > > > > Universita` di Pisa - Informatica -
> > > > > http://www.cli.di.unipi.it/~cruciani/
> > > > >
> > > > >
> > > > > --
> > > > > Unsubscribe? mail -s unsubscribe debian-user-request@lists.debian.org < /dev/null
> > > > >
> > > >
> > > > --
> > > >
> > > > Shaul Karl <shaulka@bezeqint.net>
> > >
> > > --
> > > Daniele Cruciani <cruciani@cli.di.unipi.it>
> > > Universita` di Pisa - Informatica -
> > > http://www.cli.di.unipi.it/~cruciani/
> >
> > --
> >
> > Shaul Karl <shaulka@bezeqint.net>
>
> --
> Daniele Cruciani <cruciani@cli.di.unipi.it>
> Universita` di Pisa - Informatica -
> http://www.cli.di.unipi.it/~cruciani/
--
Shaul Karl <shaulka@bezeqint.net>
Reply to: