Added a hard drive - Problems now

[Joel Dinel <kint@videotron.ca>]

I added a second hard drive to my system.

hda : HD #1
hdb : CDROM
hdc : CDRW
hdd : HD #2

This is what I get when I boot Linux :

ide_setup: hdc=ide-scsi
    ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:DMA
        ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:DMA
	hda: QUANTUM FIREBALL CX13.0A, ATA DISK drive
	hdb: ATAPI CD-ROM DRIVE 40X MAXIMUM, ATAPI CDROM drive
	hdc: YAMAHA CRW8424E, ATAPI CDROM drive
	hdd: FUJITSU MPF3102AT, ATA DISK drive
	hda: QUANTUM FIREBALL CX13.0A, 12416MB w/418kB Cache, CHS=1582/255/63, (U)DMA
	hdd: FUJITSU MPF3102AT, 9773MB w/512kB Cache, CHS=19857/16/63, UDMA
	 hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
	  hdd:hdd: timeout waiting for DMA
	  hdd: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
	  hdd: timeout waiting for DMA
	  hdd: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
	  hdd: timeout waiting for DMA
	  hdd: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
	  hdd: timeout waiting for DMA
	  hdd: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
	  hdd: DMA disabled
	   [PTBL] [1245/255/63] hdd1 hdd2
	   hdb: ATAPI 40X CD-ROM drive, 128kB Cache
	   
How the living heck can I get rid of this !?

Thanks !

-- 

Joel Dinel
kint@videotron.ca