Re: tape drive
OK the tar cv /path/to/file >/dev/st0 works, but
tar xv </dev/st0 gives this error
Sep 28 17:39:57 babylon5 kernel: st0: Error with sense data: [valid=0] Info fld=
0x0, Current st09:00: sense key Aborted Command
Sep 28 17:39:57 babylon5 kernel: Additional sense indicates Data phase error
Sep 28 17:43:56 babylon5 kernel: sym53c875E-0: SCSI parity error detected: SCR1=
3 DBC=190026fc SBCL=ae
tar: -: Cannot read: Input/output error
tar: At beginning of tape, quitting now
tar: Error is not recoverable: exiting now
is this a problem with the tape drive, the SCSI card, or is it user error?
Robert Waldner <Waldner@KPNQwest.at> wrote ..
> On Thu, 28 Sep 2000 16:56:27 CDT, techlist@techgod.net writes:
> >I just installed an HP SCSI Tape drive on my Debian(2.2) server. How do
> >I found out what device it installed it as, and how do I mount it, so I can ta
> >r stuff onto it?
>
> You don´t _mount_ a tape drive. You _t_ape _ar_chive (hence tar) stuff
> to/from it.
>
> Try "tar cv /path/to/file >/dev/st0", then "tar xv </dev/st0" to verify
> integrity.
>
> Tape-drive commands like rewind, erase etc are accessible via the
> "mt"-util.
>
> hth,
> &rw
> --
> / Robert Waldner <Waldner@KPNQwest.at> | Phone: +43 1 89933 0 Fax x533 \
> \ KPNQwest/AT tech staff | Diefenbachg. 35 A-1150 Wien /
>
>
>
> --
> Unsubscribe? mail -s unsubscribe debian-user-request@lists.debian.org < /dev/null
Reply to: