[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Network Printing



It's good to know the below, this might be a bit faster for you though. 
(as root) apt-get install printtool 

Then printtool&

Good luck



On Thu, 28 Sep 2000, Nate Bargmann wrote:

> On Thu, Sep 28, 2000 at 11:41:38AM -0400, Michael Goodman wrote:
> > Excuse my ignorance but how to you config network printers in Potato? There must be an easier way than editing the printcap file. Thanks,
> 
> Well, ummm, that's how I did it!  Actually much easier than firing up
> and learning some GUI tool I'll use once and then not again...
> 
> To wit.
> 
> Here is the salient portion of my /etc/printcap which is the same on
> both the desktop and my laptop:
> 
> lm|laser|Lexmark 4039-10R:\                                                     
> 	:lp=/dev/lp0:\                                                          
> 	:sd=/var/spool/lpd/lm:\                                                 
> 	:sh:\                                                                   
> 	:pw#80:\                                                                
> 	:pl#66:\                                                                
> 	:px#1440:\                                                              
> 	:mx#0:\                                                                 
> 	:if=/etc/magicfilter/ljet3-filter:\                                     
> 	:af=/var/log/lp-acct:\                                                  
> 	:lf=/var/log/lp-errs:                                                   
> 
> The Lexmark is connected to the desktop (which also runs Potato) and I 
> have an ethernet connection available to tie the two machines together.
> 
> Looking in the printcap file I noticed this nice little template toward
> the end:
> 
> # rlp|Remote printer entry:\                                                    
> #         :lp=:\                                                                
> #         :rm=remotehost:\                                                      
> #         :rp=remoteprinter:\                                                   
> #         :sd=/var/spool/lpd/remote:\                                           
> #         :mx#0:\                                                               
> #         :sh:                                                                  
> 
> Using this as a guide, I added the remote Lexmark alias of rlm as so:
> 
> rlm|Remote Lexmark 4039-10R on linux.n0nb.ampr.org:\                            
>         :lp=:\                                                                 
> 	:rm=linux.n0nb.ampr.org:\                                              
> 	:rp=lm:\                                                               
> 	:sd=/var/spool/lpd/remote:\                                            
> 	:mx#0:\                                                                
> 	:sh:                                                                   
> 
> I then restarted lprng with:
> 
> /etc/init.d/lprng restart 
> 
> as root.  Then I happily printed from Netscape on the laptop to the
> Lexmark in the other room.  Total time from curiosity to implementation?
> Less than 5 minutes.  Try *that* on those "administrator friendly" OSes. :)
> 
> 
> HTH,
> 
> - Nate >>
> 
> -- 
>  Wireless | Amateur Radio Station N0NB          | "None can love freedom
>  Internet | n0nb@networksplus.net               | heartily, but good
>  Location | Wichita, Kansas USA EM17hs          | men; the rest love not
>    Wichita area exams; ham radio; Linux info @  | freedom, but license."
>              http://www.qsl.net/n0nb/           | -- John Milton
> 
> 
> -- 
> Unsubscribe?  mail -s unsubscribe debian-user-request@lists.debian.org < /dev/null
> 
> 



Reply to: