On Thu, Aug 03, 2000 at 10:48:32AM +0200, Philippe MICHEL wrote: > Hello, > > I am using Debian slink, and a standard modem/pppd connection to my > provider. > > Everything works well since years (I used the same config with Slakware) > > But how/where can I see with which speed the modem has been connected ?? > > thanks, > > -- > - Philippe MICHEL I use the following /etc/chatscripts/provider file: ABORT BUSY ABORT "NO CARRIER" ABORT VOICE ABORT "NO DIALTONE" ABORT "NO ANSWER" "" ATZ OK ATX4 OK ATW1 OK ATDT947650210 CONNECT \d\c The commands to display connection speed are: ATX4: wait for dialtone, send CONNECT xxxx when connected, else send send NO DIALTONE or BUSY as appropiate ATW1: inform about modem-to-pc speed as CONNECT xxxx and connection speed as CARRIER xxxx Deppending on your modem you could need ATQ0 and ATV1 too. Here you have a connection log as given by syslogd in /var/log/ppp.log : Aug 4 12:09:45 tejeringo pppd[691]: pppd 2.3.11 started by root, uid 0 Aug 4 12:09:46 tejeringo chat[692]: abort on (BUSY) Aug 4 12:09:46 tejeringo chat[692]: abort on (NO CARRIER) Aug 4 12:09:46 tejeringo chat[692]: abort on (VOICE) Aug 4 12:09:46 tejeringo chat[692]: abort on (NO DIALTONE) Aug 4 12:09:46 tejeringo chat[692]: abort on (NO ANSWER) Aug 4 12:09:46 tejeringo chat[692]: send (ATZ^M) Aug 4 12:09:46 tejeringo chat[692]: expect (OK) Aug 4 12:09:46 tejeringo chat[692]: ATZ^M^M Aug 4 12:09:46 tejeringo chat[692]: OK Aug 4 12:09:46 tejeringo chat[692]: -- got it Aug 4 12:09:46 tejeringo chat[692]: send (ATX4^M) Aug 4 12:09:46 tejeringo chat[692]: expect (OK) Aug 4 12:09:46 tejeringo chat[692]: ^M Aug 4 12:09:46 tejeringo chat[692]: ATX4^M^M Aug 4 12:09:46 tejeringo chat[692]: OK Aug 4 12:09:46 tejeringo chat[692]: -- got it Aug 4 12:09:46 tejeringo chat[692]: send (ATW1^M) Aug 4 12:09:46 tejeringo chat[692]: expect (OK) Aug 4 12:09:46 tejeringo chat[692]: ^M Aug 4 12:09:46 tejeringo chat[692]: ATW1^M^M Aug 4 12:09:46 tejeringo chat[692]: OK Aug 4 12:09:46 tejeringo chat[692]: -- got it Aug 4 12:09:46 tejeringo chat[692]: send (ATDT947650210^M) Aug 4 12:09:47 tejeringo chat[692]: expect (CONNECT) Aug 4 12:09:47 tejeringo chat[692]: ^M Aug 4 12:10:14 tejeringo chat[692]: ATDT947650210^M^M Aug 4 12:10:14 tejeringo chat[692]: CARRIER 49333^M <<<<<<<-------- your question Aug 4 12:10:15 tejeringo chat[692]: ^M Aug 4 12:10:15 tejeringo chat[692]: PROTOCOL: LAP-M^M Aug 4 12:10:15 tejeringo chat[692]: ^M Aug 4 12:10:15 tejeringo chat[692]: CONNECT Aug 4 12:10:15 tejeringo chat[692]: -- got it Aug 4 12:10:15 tejeringo chat[692]: send (\d) Aug 4 12:10:16 tejeringo pppd[691]: Serial connection established. Aug 4 12:10:16 tejeringo pppd[691]: Using interface ppp0 Aug 4 12:10:16 tejeringo pppd[691]: Connect: ppp0 <--> /dev/ttyS1 Aug 4 12:10:21 tejeringo pppd[691]: Cannot determine ethernet address for proxy ARP Aug 4 12:10:21 tejeringo pppd[691]: local IP address 212.7.57.115 Aug 4 12:10:21 tejeringo pppd[691]: remote IP address 62.14.9.104 By the way, what means 'Cannot determine ethernet address for proxy ARP'? -- Jesús Ruiz de Infante Key fingerprint = CA 44 E4 0B 47 DF F7 8F 6F F7 8E 4A 60 19 AA 1A AE 9D D0 31 To add my public key to your keyring: pgpk -a hkp://horowitz.surfnet.nl/jesusrdig@worldonline.es
Attachment:
pgpmZb8IsaZpB.pgp
Description: PGP signature