Re: SCSI Problems with stock install of slink
I had the same problem. There is a problem with the other scsi drivers
confusing the aic7xxx driver. I was able to install using the boot floppies
with only the aic7xxx scsi driver. They can be found at:
On Mon, Jun 05, 2000 at 11:50:12PM +0530, Ravikant K.Rao wrote:
> One of my friends is having a problem - Attached is his email
> - He is *not* subscribed to the mailing list -- please cc your replies
> to Sundar Vaidyanathan <email@example.com>
> Thank You.
> From: Sundar Vaidyanathan <firstname.lastname@example.org>
> To: email@example.com
> Date: Mon, 5 Jun 2000 12:58:27 -0500 (CDT)
> I have a Adaptec 2940 SCSI card running an IOmega Zip Drive and a SCSI
> CDRom Drive. I have SCSI-Termination set to Auto.
> When I boot off the CDROM to install Debian 2.1, It hangs exactly after it
> probes my scsi devices.
> The boot messages are something like
> .... ....... 431 instructions downloaded
> after this part it hangs
> Tell me it you can find out what the problem might be
> Ravikant K.Rao : http://www.symonds.net/~ravi/
> Primary Email : <firstname.lastname@example.org> | PGP: 9544A4A1 GPG: 1024D/C2FC752D
> Unsubscribe? mail -s unsubscribe email@example.com < /dev/null