RE: Memoria reconocida por el sistema vs. memoria instalada
I think you would need:
append="mem=0x8000000"
I personally use: append="mem=128M"
Point is quotes and so forth are important :)
Cheers,
Corey Popelier
http://members.dingoblue.net.au/~pancreas
Work Email: copo@commerce.wa.gov.au
On Tue, 23 May 2000, Dominic Blythe wrote:
>
> translation - -
> >
> > Hola:
> >
> > Tenemos un servidor con Debian que es un PC clonico, tiene instaladas
> > 128 Mb de memoria RAM y la BIOS cuando arranca cuenta las 128 Mb.
> > Sin embargo cuando hacemos un free -kt lo que obtenemos es:
>
> on a pc with 128mb ram, this is the output from free -kt
>
> >
> > total used free shared buffers cached
> > Mem: 63528 62332 1196 49252 5736 34080
> > -/+ buffers/cache: 22516 41012
> > Swap: 66524 60 66364
> > Tota: 130052 62492 67560
> >
>
> assuming that the Swap entry 66524 represents the swap partition,
> why can the pc only recognise 64MB of ram?
>
> > Suponemos que la memoria de swap se refiere a la partición de swap,
> > con lo que parece que el sistema solo está reconociendo 64 Mb de las
> > 128 Mb instaladas.
> >
> > En el libro "The Debian Linux User's Guide" en el Appendix 7 apartado
> > Arguments leí lo siguiente (que reproduzco, con perdón):
> > [...]
> > mem=
> > Since the BIOS of most PCs can only report 64 Megabytes there are
> > times when the kernel needs to be told that there is more memory than
> > this. This argument should be used with great care, since, if you lie
> > to the kernel and tell it that it has more address space than it
> > actually has, the system will crash miserably as some time in the
> > near future. Also make sure that your system does not use the highest
> > memory for caching the bios code, as use of this memory by the kernel
> > will ultimately crash the system as well. The value given after the
> > equal sign should be the highest ram address available to the kernel,
> > so a 96 Megabyte system would get an argument like
> > "mem=0x6000000".
> > [...]
> >
>
> having changed lilo.conf as directed with line mem=0x08000000 (128MB as
> hex),
> i get Syntax error near line 7 in file /etc/lilo.conf
> line 7 is the mem=... line
> so how to get it to recognise 128MB ram?
>
> [i don't get the bit about the guitar - does he mean he doesn't want to
> flash
> his bios?]
>
> sorry this mail is so "cacho"
>
> > Por lo que entendí estos parametros se podian poner en el lilo.conf y
> > tomarian efecto despues de ejecutar liloconfig y rearrancar el
> > sistema, pero cuando pongo en lilo.conf mem=0x8000000 (valor
> > hexadecimal de 128 Mb) y ejecuto liloconfig me aparece el error:
> > Syntax error near line 7 in file /etc/lilo.conf
> > Que es la linea donde he puesto lo de mem=...
> >
> > ¿Alguien sabe como puedo hacer que el sistema reconozca las 128 Mb?.
> > Una posibilidad seria actualizar la BIOS del equipo pero me da miedo
> > porque la placa es marca "la guitarra" y no se si la encontaré (si es
> > que existe) asi que preferiria hacerlo con Debian (si se puede).
> >
> > Disculparme por este "cacho mail".
> >
> > Espero vuestra ayuda.
> > Saludos.
> >
> > --
> > Mecanizados, S. A.
> > Informática. Ximo Nadal.
> > Avda. Ausias March, 122. E-46026 VALENCIA (SPAIN).
> > Tel.: +34 96 373 63 62. Fax: +34 96 373 66 03.
> > E-mail: <mecasa@ctv.es>
> > --
> > Server powered by Debian GNU/Linux
> > <http://www.debian.org>
> >
> >
> > --
> > Unsubscribe? mail -s unsubscribe
> > debian-user-request@lists.debian.org < /dev/null
> >
>
>
> --
> Unsubscribe? mail -s unsubscribe debian-user-request@lists.debian.org < /dev/null
>
Reply to: