ethernet card problem
Hi!
After having now successfully compiled my new 2.0.38 kernel with all the
necessary modules I tried insmoding via-rhine, which I hope is the correct
module for (out of /proc/pci):
Bus 0, device 9, function 0:
Ethernet controller: VIA Technologies Unknown device (rev 6).
Vendor id=1106. Device id=3043.
Medium devsel. IRQ 7. Master Capable. Latency=64. Min Gnt=118.Max Lat=152.
I/O at 0xe000.
Non-prefetchable 32 bit memory at 0xfa000000.
ifconfig -a shows the eth2-interface:
eth2 Link encap:Ethernet HWaddr 00:80:C8:E4:83:E9
inet addr:0.0.0.0 Bcast:0.0.0.0 Mask:0.0.0.0
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
Interrupt:7 Base address:0xe000
and the syslog looks ok
Mar 27 21:14:15 WatchZwerg kernel: via-rhine.c:v1.00 9/5/98 Written by Donald
Becker
Mar 27 21:14:15 WatchZwerg kernel: http://cesdis.gsfc.nasa.gov/linux/drivers/v
ia-rhine.html
Mar 27 21:14:15 WatchZwerg kernel: Found VIA VT3043 Rhine at PCI address
0xe001, IRQ 7.
Mar 27 21:14:15 WatchZwerg kernel: via-rhine.c:v1.00 9/5/98 Written by Donald
Becker
Mar 27 21:14:15 WatchZwerg kernel: http://cesdis.gsfc.nasa.gov/linux/drivers/v
ia-rhine.html
Mar 27 21:14:15 WatchZwerg kernel: eth2: VIA VT3043 Rhine at 0xe000,
00:80:c8:e4:83:e9, IRQ 7.
Mar 27 21:14:15 WatchZwerg kernel: eth2: MII PHY found at address 8, status
0x7809 advertising 05e1 Link 0000.
but
bash-2.03# ifconfig eth2 192.168.2.1/24 up
SIOCSIFFLAGS: Resource temporarily unavailable
SIOCSIFFLAGS: Resource temporarily unavailable
and it doesn´t show up in ifconfig (without -a) nor is it ping´able.
Any hints for the dump&stupid like myself?
TIA,
&rw
--
/ Robert Waldner <Waldner@KPNQwest.at> | Phone: +43 1 89933 0 Fax x533 \
\ KPNQwest/AT tech staff | Diefenbachg. 35 A-1150 Wien /
Reply to: