Warning: Q < 10.66666667
what means Q in the last lines ??
I use debian 2.1
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc102"
(**) XKB: layout: "de"
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) Mach64: Graphics device ID: "Primary Card"
(**) Mach64: Monitor ID: "Primary Monitor"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi"
(--) Mach64: PCI: Mach64 RagePro rev 92, Aperture @ 0xe6000000, Registers
@ 0xe5000000, Block I/O @
0xe000
(--) Mach64: PCI (92) and CONFIG_CHIP_ID (124) don't agree on ChipRev,
using PCI value
(--) Mach64: Card type: AGP
(--) Mach64: Memory type: 5
(--) Mach64: Clock type: Internal
(--) Mach64: Maximum allowed dot-clock: 230.000 MHz
(**) Mach64: Mode "1152x864": mode clock = 135.000
(**) Mach64: Mode "1024x768": mode clock = 115.500
(**) Mach64: Mode "800x600": mode clock = 69.650
(--) Mach64: Virtual resolution: 1152x864
(--) Mach64: Video RAM: 8192k
(--) Mach64: Using hardware cursor
(--) Mach64: Using 16 MB aperture @ 0xe6000000
(--) Mach64: Using 4 KB register aperture @ 0xe5000000
(--) Mach64: Ramdac is Internal
(--) Mach64: Ramdac speed: 230 MHz
(**) Mach64: Color weight: 565
Mach64: Cannot read colourmap from VGA. Will restore with default
(--) Mach64: Pixmap cache: 2 256x256 slots, 8 128x128 slots, 32 64x64
slots
(--) Mach64: Font cache: 16 fonts
/usr/bin/pland: killed with signal 2
mach64ProgramClkMach64CT: Warning: Q < 10.66666667
mach64ProgramClkMach64CT: Warning: Q < 10.66666667
mach64ProgramClkMach64CT: Warning: Q < 10.66666667
mach64ProgramClkMach64CT: Warning: Q < 10.66666667
--
name: Sebastian Stark
email: stark@komcept.de
ircnick: cran
Reply to: