Partial success with CDROM! (but a few unexplained errors) COOL
Hello,
MANY Thanks to all who assisted! I just used the JVC CDROM to
install (many) debian packages, with only a VERY little flaky
behvaior! One time in dselect I had to go back to "access" again,
and I always get a few errors upon startup which I included below.
I made a custom 2.0.36 after making the pcmcia-cs-3.0.14 and used
the default aha152x_cs driver. This combination appears to work,
somewhat, and perhaps the startup errors below are to be expected.
I am not sure exactly what errors happened in dselect because they
were intermingled with the deselect screen, and some scrolling occured. I
posted the output, in case there is something I should
or could change to go from 98% to 100% working!
Oct 10 20:49:39 debian kernel: Linux PCMCIA Card Services 3.0.14
Oct 10 20:49:39 debian kernel: kernel build: 2.0.36 #1 Sun Oct 10 18:05:53
EST 1999
Oct 10 20:49:39 debian kernel: options: [pci] [cardbus] [apm]
Oct 10 20:49:39 debian kernel: Intel PCIC probe:
Oct 10 20:49:39 debian kernel: Cirrus PD6729 PCI-to-PCMCIA at bus 0 slot
19, port 0x3e0, 2 sockets
Oct 10 20:49:39 debian kernel: host opts [0]: [ring] [1/6/8] [1/20/8]
Oct 10 20:49:39 debian kernel: host opts [1]: [ring] [1/6/8] [1/20/8]
Oct 10 20:49:39 debian kernel: ISA irqs (default) = 3,4,5,7,9,10,11,12
polling interval = 1000 ms
Oct 10 20:49:39 debian kernel: cs: IO port probe 0x1000-0x17ff: excluding
0x15e8-0x15ef
Oct 10 20:49:39 debian kernel: cs: IO port probe 0x0100-0x04ff: excluding
0x220-0x22f 0x268-0x26f 0x330-0x337 0x388-0x38f 0x3b8-0x3e7 0x4d0-0x4d7
Oct 10 20:49:39 debian kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Oct 10 20:49:39 debian kernel: cs: memory probe 0x0d0000-0x0dffff: clean.
Oct 10 20:49:41 debian kernel: aha152x: processing commandline: ok
Oct 10 20:49:41 debian kernel: aha152x: BIOS test: passed, detected 1
controller(s)
Oct 10 20:49:41 debian kernel: aha152x0: vital data: PORTBASE=0x100, IRQ=9,
SCSI ID=7, reconnect=enabled, parity=enabled, synchronous=disabled,
delay=100, extended translation=disabled
Oct 10 20:49:41 debian kernel: aha152x: trying software interrupt, ok.
Oct 10 20:49:41 debian kernel: scsi0 : Adaptec 152x SCSI driver; $Revision:
1.18 $
Oct 10 20:49:41 debian kernel: scsi : 1 host.
Oct 10 20:49:44 debian kernel: Vendor: JVC Model: XR-W2040
Rev: 1.12
Oct 10 20:49:44 debian kernel: Type: CD-ROM
ANSI SCSI revision: 02
Oct 10 20:49:44 debian kernel: Detected scsi CD-ROM sr0 at scsi0, channel 0,
id 3, lun 0
Oct 10 20:49:48 debian kernel: Disc change detected.
Oct 10 20:49:49 debian kernel: SCSI CD error: host 0 id 3 lun 0 return code
= 28000000
Oct 10 20:49:49 debian kernel: ^ISense class 7, sense error 0, extended
sense 4
Oct 10 20:49:49 debian kernel: Disc change detected.
Oct 10 20:49:49 debian kernel: tty02 at 0x03e8 (irq = 10) is a 16550A
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
Reply to: