begging.. .(Excluded IRQ3, using IRQ9 now, but still not OK)
Hello,
While waiting for my post to show up, I digged a little
deeper, and found that irq3 was not being excluded by
PCMCIA. I excluded IRQ3 and IRQ5 (which it
picked up sometimes, but states it is wrong) and it now
uses IRQ9 like it does when running windows 95.
The dmesg output is included below, and looks
better, but I can still not access the /dev/sr0
device, it says the special device does not
exist when I try "mount /dev/sr0 /mnt".
And, according to /var/run/stab, both sockets
are empty.
Am I missing something simple? Am I close?
(dmesg output)
Memory: sized by int13 088h
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000fd870
pcibios_init : BIOS32 Service Directory entry at 0xfd880
pcibios_init : PCI BIOS revision 2.10 entry at 0xfd8c0
Probing PCI hardware.
Calibrating delay loop.. ok - 53.04 BogoMIPS
Memory: 22748k/24576k available (728k kernel code, 384k reserved, 716k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP
VFS: Diskquotas version dquot_5.6.0 initialized
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Intel Pentium with F0 0F bug - workaround enabled.
alias mapping IDT readonly ... ... done
Linux version 2.0.36 (root@gondor) (gcc version 2.7.2.3) #1 Sun Feb 21
18:29:09 EST 1999
Starting kswapd v 1.4.2.2
Real Time Clock Driver v1.09
tpqic02: Runtime config, $Revision: 0.4.1.5 $, $Date: 1994/10/29 02:46:13 $
tpqic02: DMA buffers: 20 blocks, at address 0x1f0400 (0x1f037c)
Ramdisk driver initialized : 16 ramdisks of 4096K size
loop: registered device at major 7
hda: IBM-DTNA-22110, 2016MB w/96kB Cache, CHS=1024/64/63
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8
Partition check:
hda: hda1 hda2 < hda5 hda6 >
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 50364k swap-space (priority -1)
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
tty01 at 0x02f8 (irq = 3) is a 16550A
Linux PCMCIA Card Services 3.0.5
kernel build: 2.0.36 unknown
options: [pci] [cardbus]
Intel PCIC probe:
Cirrus PD6729 PCI at port 0x3e0 ofs 0x00, 2 sockets
host opts [0]: [ring] [1/6/8] [1/20/8]
host opts [1]: [ring] [1/6/8] [1/20/8]
ISA irqs (default) = 3,4,5,7,9,10,11,12 status change on irq 11
cs: IO port probe 0x1000-0x17ff: excluding 0x15e8-0x15ef
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x268-0x26f
0x330-0x337 0x388-0x38f 0x3b8-0x3e7 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0x0d0000-0x0dffff: clean.
aha152x: processing commandline: ok
aha152x: BIOS test: passed, detected 1 controller(s)
aha152x0: vital data: PORTBASE=0x100, IRQ=9, SCSI ID=7, reconnect=enabled,
parity=enabled, synchronous=disabled, delay=100, extended
translation=disabled
aha152x: trying software interrupt, ok.
scsi0 : Adaptec 152x SCSI driver; $Revision: 1.18 $
scsi : 1 host.
Vendor: JVC Model: XR-W2040 Rev: 1.12
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
PS/2 auxiliary pointing device detected -- driver installed.
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
Reply to: