Re: SupraExpress Modem problems
Julian,
I just installed a Diamond Supra Express in a slink box this
evening.
The first thing I did was disable PNP and set the com port
and irq via the jumpers (see Appendix A of the Supra Express
"Getting Started Manual").
I was lucky that I knew the com port and irq settings of the
old modem; com2 (/dev/ttyS1) and irq3. Then it was out with
the old and in with the new. Pon worked the same as ever.
HTH,
--David
On Tue, Jul 20, 1999 at 02:03:51AM +0100, Julian Gilbey wrote:
> [Please Cc: me in replies.]
>
> I have just tried setting up a Debian system for someone, and have
> been unable to get his modem to work. The details are:
>
> - fresh slink (Debian 2.1) installation from the official CDs on a
> Pentium.
> - Windows reports the modem to be a SupraExpress 56i Sp Intl
> - I configured the PPP details using pppconfig with no special
> options or anything similar
> - the /var/log/ppp.log file showed that the intial connection had
> been attempted, and that after precisely 45 seconds, an alarm
> happened and the connection attempt failed. Nothing happened
> between the "expect OK" and the alarm lines in the log.
>
> Does anyone have any idea what to do or how to go about fixing this
> problem?
>
> Thanks in advance,
>
> Julian
--
===============================
David Karlin
mailto:dkarlin@coloradomtn.edu
http://funk48.home.travelin.com
Powered by Debian GNU/Linux 2.1
===============================
Reply to: