[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Thanks



To all: Thanks again.  I have a mouse driver on ttyS0, and the system
detected that just fine.  Anyway, it's all academic at this point, since
my CD's will no longer install, so I am Linux-less. -- Max


On Tue, 6 Jul 1999 11:23:36 +1000  "Carley, Jason (Australia)"
<jason_carley@exchange.au.ml.com> writes:
>I had a similar problem which I traced back to gpm running expecting a 
>mouse
>on com1 when it was actually psaux.  My modem was on com1 but wvdial
>couldn't find it due to gpm interfering.
>
>Took me a while but it was pretty simple in the end.
>
>I too have felt like giving up but kept going and am now very happy 
>with
>things. And I have tried all distributions under the sun.
>
>Jason.
>
>-----Original Message-----
>From: Jesse Jacobsen [mailto:jjacobsen@jvlnet.com]
>Sent: Tuesday, July 06, 1999 10:15 AM
>To: maxalbert@juno.com
>Subject: Re: Thanks
>
>
>On 07/05/99 at 18:53:51, maxalbert@juno.com wrote concerning "Thanks":
>>      After running setserial and wvdial, disabling PnP, and many 
>other
>> efforts, I finally, to overcome the system's refusal to detect my 
>modem
>> (Diamond Supra 288i SP), attempted to re-install (grasping at 
>straws),
>> but now it tells me "there was a problem" extracting the base system
>> files from the CD-rom, so re-installation has failed and I have 
>nothing
>> for weeks of effort.-- Max
>
>
>The good news is that the Linux Hardware Compatibility HOWTO doesn't
>list a modem by that description as being incompatible with Linux.  
>Now
>you just have to take a deep breath and write a detailed report to 
>this
>list of what you've tried.  Here are some things to look at or 
>include:
>
>- Does the modem work in Windows?  If so, does Windows give you
>  information about modem settings (IRQ, etc?)
>- What makes you think your modem is not recognized?
>- What happens when you try to run minicom, configured to use your
>  modem's serial device?
>- Have you taken into account that the DOS ports COM1, COM2, COM3, and
>  COM4 correspond to the Linux devices ttyS0, ttyS1, ttyS2, and ttyS3
>  respectively?
>
>For the next time you get frustrated, consider this:  it's a pretty 
>good
>guess that most of the people on this list haven't been forced to
>reinstall Debian ever.   On top of that, most probably haven't done a
>fresh install for so long that it actually takes an effort to remember
>what it was like!  In contrast, I recall reinstalling Windows several
>times each year.  Or at least making _major_ repairs.
>
>I don't know if it's possible to _master_ the intricacies of Debian.
>It's just too big!  But to me, that's something to like about it.  You
>never run out of things you can learn.  
>
>HTH,
>
>Jesse
>
>-- 
>Jesse Jacobsen, Pastor          jjacobsen@jvlnet.com
>Grace Lutheran Church (ELS)     http://www.jvlnet.com/~jjacobsen/
>Madison, Wisconsin              GnuPG public key ID: 2E3EBF13
>
>
>-- 
>Unsubscribe?  mail -s unsubscribe debian-user-request@lists.debian.org 
><
>/dev/null

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.


Reply to: