Re: Hylafax problems
On Sun, Jul 04, 1999 at 08:20:24PM +0200, Cuno Sonnemans wrote:
> Allan M. Wind wrote:
>
> > On 1999-07-04 17:46, Cuno Sonnemans wrote:
> >
> > > I Get the following warning: faxrunq hasn't been run in the last 24
> > > hours
> > >
> > > I've been told that I have to install a cron job that calls
> > > faxrunq in regular intervals, as "root" user.
> >
> > Yes or you can run faxrunq by hand - execute faxrunq when you have
> > some faxes to send out.
> >
> > > Because "faxspool" will only put the job into the Queue, but won't care
> > > about
> > > sending it out that's faxrunq's job, and cron is used to start faxrunq
> > > in the intervals I like.
What version of hylafax are you running? I have hylafax-server and
hylafax-client 4.0.2-9 installed and there are no faxrunq or faxspool
commands in either of these.
> > >
> > > But I don't know how to install a cron job.
> >
> > su
> > crontab -e
> >
> > The format of the files (from crontab(5)) is:
> >
> > field allowed values
> > ----- --------------
> > minute 0-59
> > hour 0-23
> > day of month 1-31
> > month 1-12 (or names, see below)
> > day of week 0-7 (0 or 7 is Sun, or use names)
> >
> > followed by a command, all on a single line. You should have the cron
> > and crontab pages as part of the cron package.
> >
> > /Allan
> > --
> > Allan M. Wind Phone: 781.938.5272 (home)
> > 687 Main Street, 2nd Floor Fax: 781.938.6641 (fax/modem)
> > Woburn, MA 01801 Email: wind@freewwweb.com (home)
>
> OK, thanx.....
> I've run faxrunq by hand, but now I have a new problem.
> I get the following message (my modem is on ttyS0, I've changed sendfax)
> /dev/ttyS0..............OK
> /usr/sbin/sendfax: not a class 2/2.0 fax modem.
>
> What does it mean, class 2/2.0 fax modem.
> I have a internal Trust Communicator 56K fax modem !!!!!
This sounds like /etc/hylafax/config.ttyS0 is misconfigured. Did you
successfully run faxaddmodem?
Bob
--
Bob Nielsen Internet: nielsen@primenet.com
Tucson, AZ AMPRnet: w6swe@w6swe.ampr.org
DM42nh http://www.primenet.com/~nielsen
Reply to: