[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

XGA-2 on MCA?



Hi,
 I'm almost there but not quite. Using Slink, kernel 2.0.26 ona IBM PS/2
76 MCA with XGA-2 MCA card with the xf86_agx server.
The monitor diplays the initial pointer, "X" at 2 locations, and a
further pointer which actually moves. The CTL-ALT-+ and - change the
modes.
 
 However, the monitor dispays only interlaced vertical lines of 2
different lengths, starting at the top of the screen.


  The output of X -probeonly is attached.

Thanks,
Ron Perry
XFree86 Version 3.3.2.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 15 1998
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.36 i686 [ELF] 
Configured drivers:
  AGX: Accelerated server for AGX graphics adaptors (Patchlevel 0)
(using VT number 7)

XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) AGX: Graphics device ID: "IBM"
(**) AGX: Monitor ID: "IBM"
(**) AGX: POS Base Address: 0
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/"
(**) AGX: Option "noaccel"
(**) AGX: Option "crtc_delay"
(**) AGX: Graphics chip type "xga-2" (CHIPSET)
(**) AGX: Instance = 6 (INSTANCE).
(--) AGX: I/O Mapped Register Base Address = 0x2160 (IOBASE)
(--) AGX: Video Memory 64K Aperature Base Address = 0xa0000 (VGABASE)
(--) AGX: Using 64 kb aperture @phys-0xa0000, virt-0x400df000
(--) AGX: Coprocessor Memory-Mapped Register Base Address = 0xc1f00 (COPBASE)
(--) AGX: Coprocessor's Video Memory Base Address = 0x1800000 (MEMBASE)
(**) AGX: Pixel Depth = 8
(--) AGX: Dot-clocks at 8 bpp: Programmable
(--) AGX: Maximum allowed dot-clock: 80.000 MHz
(**) AGX: Mode "640x480": mode clock =  25.175
(**) AGX: Mode "1024x768": mode clock =  44.900
(--) AGX: Virtual resolution = 1024x768, CRTC Line Width = 1024
(**) AGX: Videoram = 1024k
(--) AGX: ScratchPad = 256k @ offset 0xc0000

Reply to: