Re: Symbol for parameter not found - ethernet
On Fri, Jun 18, 1999 at 02:45:47PM -0500, Kent West wrote:
> I searched the archives for this, and found the same problem, but no
> answer.
>
> I've lost my network card on a 2.0.36 installation. It's a 3C509B card,
> and on boot-up I see the error "Symbol for parameter io not found".
> After logging in I can do an "insmod 3c509" and the card appears to be
> recognized (but I don't know how to get the network started now that the
> card is....).
Check your /etc/modutils/aliases for a line like
"options 3c509 io=xxxx", remove it, and run update-modules.
>
> 1] How do I fix the boot-up problem?
>
> 2] How would I start the network after starting the NIC manually?
/etc/init.d/network should be it. If you have a DHCP assigned IP
(like me), then also do /etc/init.d/dhcpcd-sv.
>
> Thanks.
>
>
> --
> Unsubscribe? mail -s unsubscribe debian-user-request@lists.debian.org < /dev/null
>
>
--
Stephen Pitts
smpitts@midsouth.rr.com
webmaster - http://www.mschess.org
Reply to: