[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Need help with Sound Modules



On Fri, Jun 18, 1999 at 11:08:45AM +0100, Frankie wrote:
> "Andrew C. Gronosky" wrote:
> 
> > Hi,
> >
> > My new PC has a Creative AWE64 card and I've been pulling my hair out
> > trying to configure it. :)  I am running the 2.2.1 kernel with all the
> > correct modules according to the kernel documentation.  The card is PnP
> > and I believe I have it configured properly with isapnp.

You should start by reading the following files, in the sound folder of the kernel
Documentation :

AWE32 
README.awe

This will give you step-by-step guidelines of how to set up your soundcard.

> > /lib/modules/2.2.1/misc/soundcore.o: invalid parameter io
> > soundlow: No such file or directory
> >
> > Installation failed.
> >
> > Now I've looked around a bit and my /etc/conf.modules looks very odd.
> 
> I dont know what your problem is with the modules(1), but can't you look at the time/date
> stamp?
> 
> 1. OK I have just had a look through your files. isapnp.conf looks OK, but [and I could
> well be wrong]  conf.modules seems to have a few rogue options.
> 
> options sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330
> options sound io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330
> options uart401 io=0x220 irq=5 dma=1 dma16=5
> options soundcore io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330
> options sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330
> options sb sb io=0x220 irq=7 dma=1 dma16=5 mpu_io=0x330
> options sound io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330
> options uart401 io=0x220 irq=5 dma=1 dma16=5
> options sound io=220 irq=5 dma=1 dma16=5 mpu_io=330
> options sound io=0x220
> options sound io=0220
> options sound io=0x220 irq=5 dma=1 dma16=5 mpu_io-0x330
> options soundcore io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330
> options sound options sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330
> options soundlow io=0x220

modconf seems to keep every previous configuration.

The best thing to do would be to delete all lines and run modconf again.

My (working) configuration says :

options sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330
options adlib_card io=0x388

Hope it helps.

Best Regards.


Jean-Philippe


-- 
-- Jean-Philippe Guérard ---------------------------------------------
| PARIS XIXe - FRANCE - mailto:jean-philippe.guerard@mail.dotcom.fr  |
|                                                                    |
|  « Et avec la nuit, vint la lumière. » -- Légendes de Yarth        |
----------------------------------------------------------------------


Reply to: