Re: [OT] Matrox G200 3D acceleration
>Resent-Cc: recipient list not shown: ;
>X-Envelope-Sender: alisdair@letdown.demon.co.uk
>Date: Sun, 13 Jun 1999 11:37:59 +0100
>From: Alisdair McDiarmid <alisdair@letdown.demon.co.uk>
>Mail-Followup-To: debian-user@lists.debian.org
>Content-Type: text/plain; charset=us-ascii
>Resent-From: debian-user@lists.debian.org
>X-Mailing-List: <debian-user@lists.debian.org> archive/latest/52938
>X-Loop: debian-user@lists.debian.org
>Precedence: list
>Resent-Sender: debian-user-request@lists.debian.org
>
>I heard that there are OpenGL drivers for the Matrox Millennium
>G200 available for Linux, but I've looked on www.matrox.com and
>everywhere else I can think of, and I can't find them anywhere.
>Does anyone know where they are?
>--
I have a Matrox Millennium G200 (8Mg) working in my computer, and I
have a driver for it "xmatrox_2.2-1_i386.deb".
I have followed the steps described by Jameson Burt (message below).
If you want I can mail the driver...
At\'e breve
Pedro Quaresma de Almeida
Departamento de Matem\'atica, Faculdade de Ci\^encias e Tecnologia
Universidade de Coimbra
P-3000 COIMBRA, PORTUGAL
e-mail: quaresma@hilbert.mat.uc.pt
url: http://www.mat.uc.pt/~pedro/
phone: 351 39 791170
From: Jameson Burt <jameson@mnsinc.com>
To: Sean M Hollingsworth <skaven@spiritone.com>
cc: debian-user@lists.debian.org
Subject: Re: Matrox Xserver on Debian
In-reply-to: Your message of "Tue, 22 Dec 1998 18:28:59 PST."
<3680556B.5053E217@spiritone.com>
Content-Type: text/plain; charset=us-ascii
Date: Tue, 22 Dec 1998 23:19:25 -0500
Sender: jameson@mnsinc.com
Resent-From: debian-user@lists.debian.org
X-Mailing-List: <debian-user@lists.debian.org> archive/latest/30446
X-Loop: debian-user@lists.debian.org
Precedence: list
Resent-Sender: debian-user-request@lists.debian.org
I know a couple people who have installed this card, including myself.
Here is what I did.
1. From http://www.suse.de/XSuSE/XSuSE_E.html, I got the following
for my Matrox G200 video card,
xmatrox-2.2-0.i386.rpm
xsuseconfig-981102.tgz
2. I ran
alien xmatrox-2.2-0.i386.rpm
which created the debian file
xmatrox_2.2-1_i386.deb
I install this xmatrox_2.2-1_i386.deb file,
dpkg -i xmatrox_2.2-1_i386.deb
3. I uncompressed and installed
xsuseconfig-981102.tgz
This has the program xf86config, which will recognize your matrox G200
card. Specifically this tar file has two files,
/usr/X11R6/bin/xf86config
/usr/X11R6/lib/X11/Cards
These two files replace those belonging to the xbase package.
4. Backup /etc/X11/XF86Config, then run
xf86config
4. You probably don't even need to run xf86config.
If you don't mind using your old resolutions (eg, 1024x768)
and the old amounts for video memory,
then you need only change the first line of Xserver to
/usr/X11R6/bin/XFCom_Matrox
This surprised and delighted me that I didn't need to run xf86config
or alter XF86Config when going from an NEC C500 monitor and a
Number 9 S3V video card to a newer Nokia 445Xpro monitor and
a Matrox G200 video card.
I eventually did run xf86config, though, with no real problems.
This xf86config seemed to know I had 8192 KB memory.
The package xmatrox_2.2-0.i386.rpm has the files
/usr/X11R6/bin/XFCom_Matrox
/usr/X11R6/lib/X11/doc/README.XFCom_Matrox
/usr/doc/xmatrox/copyright
/usr/doc/xmatrox/changelog.Debian
/usr/doc/xmatrox/buildinfo.Debian
All these are uniquely "matrox" so present no conflicts with other files.
When you upgrade packages with dselect, dselect won't know the location
of xmatrox (for all practical purposes, I removed my created matrox debian
package), though it knows you installed it and what its files are. When you
eventually do upgrade to a version of debian with
the Matrox G200 driver (maybe in March, 1999?), then you can of course
purge this xmatrox package.
Any upgrade of xbase will replace your two new files from suse.
In the past I could more easily get my video card's driver,
but once I got the xmatrox package, I found installation much simpler.
For example, I did not need to do an "X --probeonly" to get the clocks.
> I am (hopefully) putting a Matrox Millennium G200 AGP in my linux box
> next month. I know that S.u.S.E has an Xserver for this card, but I can
> only find tarballs and RPMs for it. I now have two questions:
>
> 1) Is there a deb of the Matrox Xserver?
>
> 2) In the event I can't find a deb, would installing the xserver from a
> tarball or an RPM cause any problems with compatibility? Say with
> updates, other libs, etc...
>
>
>
>
> --
> Unsubscribe? mail -s unsubscribe debian-user-request@lists.debian.org < /dev/null
>
Reply to: