[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

X server problem again.



Hi all,

I am having a strange problem running X.  As of now, I can run X as root, 
not as a user.  I don't know why, but here's the error message I got.

Best wishes,
Chip 

Error message running X as a user
hostname: Unknown host

_XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
_XSERVTransMakeAllCOTSServerListeners: server already running

Fatal server error:
Cannot establish any listening sockets - Make sure an X server isn't 
already run
ning

When reporting a problem related to a server crash, please send
the full server output, not just the last messages

_X11TransSocketUNIXConnect: Can't connect: errno = 111
giving up.
xinit:  Connection refused (errno 111):  unable to connect to X server
xinit:  No such process (errno 3):  Server error.


Message running X as root:
hostname: Unknown host


XFree86 Version 3.3.2.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 15 1998
        If the server is older than 6-12 months, or if your card is newer
        than the above date, look for a newer version before reporting
        problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.36 i686 [ELF]
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 0):
      NV1, STG2000, RIVA128, ET4000, ET4000W32, ET4000W32i,
      ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
      ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100,
      et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33,
      gvga, ati, sis86c201, sis86c202, sis86c205, tvga8200lx, tvga8800cs,
      tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i,
      tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,
      tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
      tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
      3dimage975, 3dimage985, clgd5420, clgd5422, clgd5424, clgd5426,
      clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480,
      clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235,
      clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, ncr77c22, ncr77c22e,
      cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, oti067, oti077,
      oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401,
      cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,
      ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_virge,
      s3_svga, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545,
      ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct64200,
      ct64300, generic
(using VT number 7)

XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: MouseMan, device: /dev/mouse, baudrate: 1200
(**) Mouse: buttons: 3
(**) SVGA: Graphics device ID: "WD 90C24A-ZZ"
(**) SVGA: Monitor ID: "My Monitor"
(--) SVGA: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 35.52 kHz. Deleted.
(--) SVGA: Mode "640x400" needs hsync freq of 37.86 kHz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 37.50 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted.
(--) SVGA: Mode "640x400" needs hsync freq of 43.27 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 43.92 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(--) SVGA: Mode "512x384" needs hsync freq of 34.38 kHz. Deleted.
(--) SVGA: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
(--) SVGA: Mode "400x300" needs hsync freq of 35.16 kHz. Deleted.
(--) SVGA: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted.
(--) SVGA: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
(--) SVGA: Mode "480x300" needs hsync freq of 35.16 kHz. Deleted.
(--) SVGA: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted.
(--) SVGA: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
(--) SVGA: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
(**) FontPath set to 
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75
dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts
/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) SVGA: wd90c24: No MCLK specified in 'Clocks' line.  Using default 45
(**) SVGA: chipset:  wd90c24
(--) SVGA: videoram: 1024k
(**) SVGA: clocks:  25.18  28.32  65.00  36.00  29.98  77.41  62.20  59.96
(**) SVGA: clocks:  31.50  35.50  75.17  50.11  39.82  72.04  44.74  80.09
(**) SVGA: clocks:  44.30  25.18  28.32  65.00  36.00  29.98  77.41  62.20
(**) SVGA: clocks:  59.96  31.50  35.50  75.17  50.11  39.82  72.04  44.74
(**) SVGA: clocks:  80.09  44.30
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Maximum allowed dot-clock: 90.000 MHz
(**) SVGA: Mode "640x480": mode clock =  25.175, clock used =  25.175
(--) SVGA: There is no mode definition named "800x600"
(--) SVGA: Removing mode "800x600" from list of valid modes.
(--) SVGA: There is no mode definition named "1024x768"
(--) SVGA: Removing mode "1024x768" from list of valid modes.
(--) SVGA: Virtual resolution set to 640x480
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: PVGA1: SpeedUps selected (Flags=0xf)
System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb 
-xkm -m us
 -em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp "> " -eml 
"Errors
from xkbcomp are not fatal to the X server" keymap/xfree86 
compiled/xfree86.xkm'

waiting for X server to shut down .FreeFontPath: FPE 
"/usr/X11R6/lib/X11/fonts/m
isc/" refcount is 2, should be 1; fixing.
.



Reply to: