Re: Network newbie
Hey, that worked wonderfully. Now I have another question:
I can telnet from one machine, running Debian 1.3, to another, running
2.1, and everything acts normally. When I do it the other way, from the
Slink machine to the Bo machine, it takes forever to get to a login:
prompt. What might be causing that?
On Thu, 29 Apr 1999, [ISO-8859-1] Nils-Erik Svangård wrote:
> Hi
> 1: run modconf as root, go into the subdir net an press enter on the ne200
> module, the module should prompt you for a io adress enter io=0x300 or 330
> depending of what you have. Then hopefully you can read Installation
> successfull on the screen.
> 2: Configure the network (/etc/init.d/network)
> /nisse
>
> On Wed, 28 Apr 1999, Robert Kerr wrote:
>
> > Okay, is there any walk-through written on how to configure my home
> > network? I've got two machines, with NE2000-compatible network cards.
> > I've recompiled my kernel to give me module support of them, but now I'm
> > stuck. Can anyone point me in the right direction so I can find the
> > instructions?
> >
> > (FWIW I've read the NET-3 HowTo, and find it sadly lacking.)
> >
> > Thanks
> >
> > -bob
> >
> > Cananyonepleasetellmehowtofixmyspacebar?
> > **********************************************************************
> > * Robert Kerr, The morphing guy. * 368 Clyde Building, BYU *
> > * rakerr@sandia.gov * Provo, Utah 84602 *
> > * Robert_Kerr@byu.edu * Phone: (801) 378-2029 *
> > * http://www.et.byu.edu/~kerrr * Fax: (801) 378-4449 *
> > **********************************************************************
> >
> >
> >
> > --
> > Unsubscribe? mail -s unsubscribe debian-user-request@lists.debian.org < /dev/null
> >
>
-bob
Cananyonepleasetellmehowtofixmyspacebar?
**********************************************************************
* Robert Kerr, The morphing guy. * 368 Clyde Building, BYU *
* rakerr@sandia.gov * Provo, Utah 84602 *
* Robert_Kerr@byu.edu * Phone: (801) 378-2029 *
* http://www.et.byu.edu/~kerrr * Fax: (801) 378-4449 *
**********************************************************************
Reply to: