uucp question
Hi ppl, Could someone explain me how should I use uucp to download
multiple files at once. This command doesn't work for me:
uucp crdlx2\!/var/spool/uucppublic/\*tmp gaguk\!~
...while these four commands do their job just fine.
uucp crdlx2\!/var/spool/uucppublic/123tmp gaguk\!~
uucp crdlx2\!/var/spool/uucppublic/124tmp gaguk\!~
uucp crdlx2\!/var/spool/uucppublic/125tmp gaguk\!~
uucp crdlx2\!/var/spool/uucppublic/126tmp gaguk\!~
Here is what I have found in uucp's info:
" The shell metacharacters `?' `*' `[' and `]' are interpreted on the
appropriate system, assuming they are quoted to prevent the shell from
interpreting them first."
Do I use wrong quotation symbol before '*'?
Probably it would be possible to figure out what is going wrong from debug
info. There are some strings where "Bad header" is mentioned. What does it
mean?
Thanks in advance for any help,
Eugene.
--------------------------------------------------
Login successful
DEBUG: fsend_uucp_cmd: Sending "Sgaguk -R -N07"
DEBUG: zget_uucp_cmd: Got "\020ROKN07\000"
DEBUG: zget_uucp_cmd: Got "\020PgvG\000"
DEBUG: fsend_uucp_cmd: Sending "Ug"
DEBUG: fgsend_control: Sending control INITA 7
DEBUG: fgprocess_data: Got control INITA 7
DEBUG: fgsend_control: Sending control INITB 1
DEBUG: fgprocess_data: Got control INITB 1
DEBUG: fgsend_control: Sending control INITC 7
DEBUG: fgprocess_data: Got control INITC 7
Handshake successful (protocol 'g' sending packet/window 64/7 receiving
64/7)
64/7)
2558) Requesting work: /var/spool/uucppublic/*tmp to
gaguk!/var/spool/uucppublic
2558) DEBUG: fgsendcmd: Sending command "X /var/spool/uucppublic/*tmp
gaguk!/var/spool/uucppublic sevinian -d"
DEBUG: floop: Waiting for data
2558) DEBUG: fgot_data: Charging 217031 to X /var/spool/uucppublic/*tmp
gaguk!/var/spool/uucppublic
DEBUG: floop: No work for master
DEBUG: fgsendcmd: Sending command "H"
DEBUG: floop: Waiting for data
2558) DEBUG: fgot_data: Charging 217031 to X /var/spool/uucppublic/*tmp
gaguk!/var/spool/uucppublic
DEBUG: floop: No work for master
DEBUG: fgsendcmd: Sending command "H"
DEBUG: floop: Waiting for data
DEBUG: ftadd_cmd: Got command "HN"
DEBUG: fgprocess_data: Bad header: K 2 TT 0 XOR byte 105 calc 17
DEBUG: fgsend_control: Sending control RJ 3
DEBUG: fgprocess_data: Bad header: K 2 TT 0 XOR byte 105 calc 17
DEBUG: fgprocess_data: Bad header: K 2 TT 0 XOR byte 105 calc 17
DEBUG: fgprocess_data: Bad header: K 2 TT 0 XOR byte 105 calc 17
DEBUG: fgprocess_data: Bad header: K 2 TT 0 XOR byte 105 calc 17
DEBUG: fgprocess_data: Bad header: K 2 TT 0 XOR byte 105 calc 17
DEBUG: fgprocess_data: Bad header: K 2 TT 0 XOR byte 105 calc 17
DEBUG: fgprocess_data: Bad header: K 2 TT 0 XOR byte 105 calc 17
DEBUG: fgprocess_data: Got control CLOSE 0
ERROR: Received unexpected CLOSE packet
DEBUG: fgsend_control: Sending control CLOSE 0
DEBUG: fgsend_control: Sending control CLOSE 0
DEBUG: fgsend_control: Sending control CLOSE 0
Protocol 'g' packets: sent 3, resent 0, received 3
Errors: header 8, checksum 0, order 0, remote rejects 0
DEBUG: fsend_uucp_cmd: Sending "OOOOOO"
DEBUG: fsend_uucp_cmd: Sending "OOOOOO"
DEBUG: zget_uucp_cmd: Got "\020\011\"*\010\011\020OOOOOOO\000"
Call complete (71 seconds 0 bytes 0 bps)
DEBUG: fcsend: Writing sleep sleep "+++" sleep sleep "ATM0H\r"
DEBUG: Call failed: 5 (Call failed)
Eugene Sevinian
----------------------------
CRD, YerPhI, 375036, Armenia
URL: http://crdlx5.yerphi.am/
Phone: 374-2-344873
Reply to: