RE: PCI Linksys card in Hamm
one more thing ...I think the module name was ne2kpci.o
---Cristov Russell <firstname.lastname@example.org> wrote:
> Hi Kenneth
> Thanks for the reply. Which driver is the NE2000 PCII? I don't
> seeing anything described as that. Thanks.
> -----Original Message-----
> From: Kenneth Scharf [mailto:email@example.com]
> Sent: Wednesday, February 10, 1999 6:57 AM
> To: firstname.lastname@example.org
> Cc: email@example.com
> Subject: PCI Linksys card in Hamm
> It uses the NE2000 driver which requires the IO and IRQ parameters
> specified. From Windoze I've verified the IRQ is 9 and the IO is
> After entering the values (io=0x6C00 irq=9) the system hangs. I'm not
> exactly sure what I'm doing wrong this time. Any suggestions?
> I am using a ne2000 pci card in my system at home. It uses one of
> those real-tek chips. Anyway I think you need the ne2000-pci driver.
> In my case the driver can either probe the card for the io and irq, or
> it is getting it from the bios. I did not have to provide any
> parameters, and the card works fine. I have it installed as a module.
> You might have to play with the plug and play settings on your bios
> (if any, I had to turn this on and off before it worked the first time
> to avoid irq conflicts with other cards).
> Amateur Radio, when all else fails!
> Debian Gnu Linux, Live Free or .....
> DO YOU YAHOO!?
> Get your free @yahoo.com address at http://mail.yahoo.com
Amateur Radio, when all else fails!
Debian Gnu Linux, Live Free or .....
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com