Re: 2.2.1

[Leszek Gerwatowski <bigl@cs.tg.com.pl>]

On Wed, Feb 10, 1999 at 05:03:06AM -0800, Kenneth Scharf wrote:
> > I'm now using
> >2.2.1 on hamm, also with no problems apart from the >need to change the
> >port
> >on /etc/printcap.
> What software did you upgrade before going to 2.2.1?  Are you running
> anything as modules, and if so how did you configure this?  I
> downloaded 2.2.1 and tried to install it.  My ethernet, scsi, cd, and
> lp were not available (compiled as modules).  My root filesystem is on
> an ide drive, but /usr is on a scsi.  I thought this would work with
> scsi as a module.  Are  you using kmod?
> Thanks for any help.
> 

I tried to run 2.2.1 with problems with modules and I discovered that file
/etc/conf.modules is no longer the one in which is configuration of
modules. Instead you have file /etc/modutils/conf.i386 or if you have
package modutils form slink yoy put everything into two files:
/etc/modutils/aliases and /etc/modutils/arch/i386. That's all. 

-- 
o------------------o      ___
|Leszek Gerwatowski|    _/_|_\
o------------------o   (o\__/o)=)))))))))))))
"This message is SHAREWARE, please register..."