No automatic recognisation of ISDN card after update to hamm
Hi all,
some days ago I made the update from bo to hamm. Most things work fine,
but I have a problem with my ISA PNP ISDN card (Teles 16.3c). During
bootup the kernel doesn´t recognise the card and the initialisation
fails. Nevertheless, when I call "modprobe hisax" all needed modules
will be loaded and after calling "/etc/init.d/isdnutils start" I can
start the ISDN connection.
I have tried to create a new "/etc/isapnp.conf" with pnpdump (from
package isapnptools (1.13-3.1). But the new config files doesn´t contain
any entires from the ISDN card (only the Soundblaster Pro clone card).
I don´t understand this behavior: I can use the card, but neither the
kernel nor pnpdump doesn´t recognize it.
Kernel is 2.0.33 with patch for the 16.3c Teles card. Should I try a
2.1.x kernel? Which?
The following I found in /var/log/daemon.log:
--------------------
Jul 8 21:16:19 localhost kerneld: started, pid=84, qid=0
Jul 8 21:16:21 localhost modprobe: can't locate module char-major-45
Jul 8 21:16:21 localhost modprobe: can't locate module char-major-45
Jul 8 21:16:22 localhost modprobe: can't locate module ippp0
Jul 8 21:16:23 localhost modprobe: can't locate module char-major-45
--------------------
This was during bootup. But now, after calling modprobe and isdnutils
start by hand, I found this in /var/log/kern.log:
--------------------
Jul 8 21:17:14 localhost kernel: CSLIP: code copyright 1989 Regents of
the Univ
ersity of California
Jul 8 21:17:14 localhost kernel: ISDN subsystem Rev:
1.44/1.41.2.1/1.48.2.1/1.2
8/1.8 loaded
Jul 8 21:17:14 localhost kernel: HiSax: Driver for Siemens chip set
ISDN cards
Jul 8 21:17:14 localhost kernel: HiSax: Version 2.8
Jul 8 21:17:14 localhost kernel: HiSax: Revisions
1.15.2.5/1.10.2.4/1.10.2.3/1.
30.2.4/1.8.2.4
Jul 8 21:17:14 localhost kernel: HiSax: Total 1 card defined
Jul 8 21:17:14 localhost kernel: HiSax: Card 1 Protocol EDSS1 Id=teles
(0)
Jul 8 21:17:14 localhost kernel: HiSax: Teles 16.3c driver Rev. 1.1.2.2
Jul 8 21:17:14 localhost kernel: teles3c: defined at 0x580 IRQ 10 HZ
100
Jul 8 21:17:14 localhost kernel: teles3c: resetting card
Jul 8 21:17:15 localhost kernel: Teles 16.3c: IRQ 10 count 0
Jul 8 21:17:15 localhost kernel: Teles 16.3c: IRQ 10 count 2
Jul 8 21:17:15 localhost kernel: HiSax: DSS1 Rev. 1.16.2.2
Jul 8 21:17:15 localhost kernel: HiSax: 2 channels added
Jul 8 21:17:15 localhost kernel: HiSax: module installed
Jul 8 21:17:31 localhost kernel: isdn: Verbose-Level is 1
Jul 8 21:17:32 localhost kernel: HiSax: debugging flags card 1 set to 4
Jul 8 21:18:58 localhost kernel: ippp0: dialing 0 0191011...
Jul 8 21:18:59 localhost kernel: isdn_net: ippp0 connected
--------------------
Why on earth the kernel doesn´t recognizes the card during bootup?
Perhaps I should mention, that not the whole system is updated to hamm,
only the "required" (in dselect) packages was downloaded from the debian
ftp mirror.
Can anybody give me some hints?
-cu
Karlheinz.
--
| / mailto:karlheinz.nolte@t-online.de
|__/ http://home.t-online.de/home/karlheinz.nolte
| |\ | voice: +49-7141-978249
| | \| fax/data(modem): +49-7141-978250 (login: guest w/o pw)
--
Unsubscribe? mail -s unsubscribe debian-user-request@lists.debian.org < /dev/null
Reply to: