Re: AWE 64 setup ?
On Mon, Dec 28, 1998 at 11:42:24AM +0100, Didier Verna wrote:
>
> Hi!
>
> Is there a simple way to setup my SoundBlaster AWE 64 for debian ?
please install:
Package: awe-drv
Status: install ok installed
Priority: extra
Section: sound
Installed-Size: 462
Maintainer: Tom Lees <tom@lpsg.demon.co.uk>
Source: awe
Version: 0.4.3-pre-2-1
Replaces: awe-utils, awe-patch
Provides: awe-utils, awe-patch
Depends: libawe0.4, libc6 (>= 2.0.7u)
Conflicts: awe-utils, awe-patch
Description: Linux AWE32 driver source and utilities
[..]
Package: isapnptools
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 140
Maintainer: Frederic Lepied <Lepied@debian.org>
Version: 1.16-4.1
Depends: libc6 (>= 2.0.7u), dpkg (>= 1.4.0.21), grep, awk
Suggests: pciutils
[..]
after that configure Your kernel like:
!!!
please note:
the irq's and th io'sare based on the
configruation of my systems, this
are my individual settings of this
items .
It is highly recommended You will
change these parameters to the
dependencies of Your system.
!!!
# Sound
#
CONFIG_SOUND=m
# CONFIG_PAS is not set
CONFIG_SB=y
CONFIG_ADLIB=y
CONFIG_AUDIO=y
CONFIG_MIDI=y
CONFIG_YM3812=y
SBC_BASE=220
SBC_IRQ=9
SBC_DMA=3
SB_DMA2=7
SB_MPU_BASE=330
SB_MPU_IRQ=-1
DSP_BUFFSIZE=65536
CONFIG_LOWLEVEL_SOUND=y
CONFIG_AWE32_SYNTH=y
an build a new kernel, don't forget to add the line
sound in Your
/etc/modules
[..]
# loading the sound module
sound
#st
next step
pnpdump > /etc/isapnp.conf
edit the resulted file, maby result is:
# $Id: pnpdump.c,v 1.16 1998/10/09 22:19:06 fox Exp $
# Board 1 has serial identifier 41 12 94 bb 9f c5 00 8c 0e
# (DEBUG)
(READPORT 0x020b)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
(CONFIGURE CTL00c5/311737247 (LD 0
# ANSI string -->Audio<--
(INT 0 (IRQ 9 (MODE +E)))
(DMA 0 (CHANNEL 3))
(DMA 1 (CHANNEL 7))
(IO 0 (SIZE 16) (BASE 0x0220))
(IO 1 (SIZE 2) (BASE 0x0330))
(IO 2 (SIZE 4) (BASE 0x0388))
(NAME "CTL00c5/311737247[0]{Audio }")
(ACT Y)
))
(CONFIGURE CTL00c5/311737247 (LD 1
# Compatible device id PNPb02f
# ANSI string -->Game<--
(IO 0 (SIZE 8) (BASE 0x0200))
(NAME "CTL00c5/311737247[1]{Game }")
(ACT Y)
))
(CONFIGURE CTL00c5/311737247 (LD 2
(IO 0 (SIZE 4) (BASE 0x0620))
(IO 1 (SIZE 4) (BASE 0x0A20))
(IO 2 (SIZE 4) (BASE 0x0E20))
(NAME "CTL00c5/311737247[2]{WaveTable }")
(ACT Y)
))
(WAITFORKEY)
#end of /etc/isapnp.conf
--
Peter
Reply to: