libc6_2.0.7u-3/Gimp install problems
I'm sorry, I can't answer your question. However, I would like to
install a UNAX 1220S scanner on my Debian box too. I've been told
that the SCSI adapter card that comes with the scanner isn't supported
by Linux (a DTC 436E). Is this true?
I was told by the UMAX distributors to get an adaptec 1540/42 or 2940
or 3940 card. Any suggestions? I only want to access the scanner
through it so I'm looking for a sensible price/performance.
thanks
Kevin
Mike Nachlinger writes:
>
> Hi All,
>
> I've upgraded Debian 1.3.1r6 to 2.0 + some Slink libs.
> I've upgraded using dpkg instead of dselect.
> Trying to upgrade to libc6_2.0.7u-3 I get the following error;
>
> Usage: init 0123456SsQqAaBbCc
> dpkg: error processing libc6 (--configure):
> subprocess post-installation script returned error exit status 1
> Errors were encountered while processing:
> libc6
>
> libc6_2.0.7u-2 installed ok. Is this a packaging problem or am I
> missing a supporting package?
>
> What brought this upgrade on is I've loaded SANE_0.74, added a UMAX
> 1220S scanner, and GIMP_1.0.2, Freefonts, Sharefonts.
> Have not yet recompiled with big buffers.
> Have patched SANE with Oliver's SANE-UMAX-0.74d patch.
>
> Starting GIMP I get a blank opening startup window with the following
> error message;
>
>
> ** ERROR **: BadMatch (invalid parameter attributes)
> serial 263 error_code 8 request_code 1 minor_code 0
>
> g_error: recursed!
> g_error: recursed!
> g_error: recursed!
> g_error: recursed!
> g_error: recursed!
> Xlib: sequence lost (0x10000 > 0x11f) in reply type 0x3!
> Xlib: sequence lost (0x1000b > 0x11f) in reply type 0x6!
> Xlib: sequence lost (0x10008 > 0x11f) in reply type 0x1!
>
> ^C produces "gimp terminated: sigint caught"
>
> libgtk1_1.1.x was installed & removed
> libgtk1_1.0.6 is installed - ldconfig run.
>
> ldd shows;
>
> libgtk.so.1 => /usr/local/lib/libgtk.so.1 (0x40010000)
> libgdk.so.1 => /usr/local/lib/libgdk.so.1 (0x400b8000)
> libglib.so.1 => /usr/local/lib/libglib.so.1 (0x400d7000)
> libXext.so.6 => /usr/X11R6/lib/libXext.so.6 (0x400e3000)
> libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x400ef000)
> libm.so.6 => /lib/libm.so.6 (0x40194000)
> libc.so.6 => /lib/libc.so.6 (0x401ac000)
> /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000)
>
> All libs exist and are simlinks to proper libs.
>
> .gimp/gimprc sets the 8 bit colormap.
>
> Installing the source from gimp.org and compiling produces the same errors.
> (Gimp & libgtk)
>
> I'm using an old Matrox MGA Ultima/PCI 2meg graphics card with the
> AcceleratedX 4.2 Xserver. (until the Matrox G200/PCI Millenium 16meg is
> available next month)
>
> I've read all the docs I can find & checked archives of debian.org, gimp.org,
> and mostang.com, printed all 550 pages of GUM - I'm lost here, any pointers
> would be great.
>
> I suspect I'm missing a nessesary lib. Any ideas?
>
> Thanks!
> Mike
>
> P.S. An early gimp package worked fine, I think it was 0.74???
>
> +--------------------------------------------------+
> | Mike Nachlinger (408) 446-9914 mnach@apres.org |
> | Apres Ski Club 1-888-APRESGO www.apres.org |
> +--------------------------------------------------+
>
>
>
>
>
> --
> Unsubscribe? mail -s unsubscribe debian-user-request@lists.debian.org < /dev/null
>
Reply to: