Re: Ax25-utils crash , Help me !
Hi Tony, just a good guess based on the fact that ALL of Linux
crashes. It sounds very much like a Hardware failure. As a rule software
will not crash Linux. Now the z8530 hardware is capable of bringing down
Linux if it fails. So suggest you look at the driver software first and
then the actual x8530 hardware last. Check hardware by removing/replacing
for a check.
On Mon, 5 Oct 1998, Tony Schonfeld wrote:
> hello ,
>
> i repeat my problem for the debian-user mail-list :
>
> I use Debian 2.0 with Libc6 and libc5 , kernel 2.0.35 , z8530drv 2.4c
> and ax25-utils 2.1.42a .
>
> In the kernel i've compile in modules :
>
> CONFIG_AX25
> CONFIG_NETROM
> CONFIG_ROSE
> CONFIG_NET_RADIO
> CONFIG_BAYCOM
> CONFIG_MKISS
> CONFIG_SCC
>
> All work fine here but since i use ax25-utils my server has crash
> for the third time.
>
> To my screen i can read :
> ax0 memory squeeze dropping packet
> ax1 memory squeeze dropping packet
> couldn't get a free page
>
> In syslog before the crash:
> 5 12:58:16 f5git node[7642]: getpeername: Transport endpoint is not
> connected
>
> my memory decrease with time and i think make a big crash in
> my machine after 9 or 12 hours.
> the same server without ax25 in the kernel (only scc driver)
> work very fine with Tnos.
>
> you can found my ax25 config files in the message attachment.
>
> Please Help me to solve this problem if possible !
> Many thanks per advance
> Tony
>
>
> ------------
> Tony Schonfeld - F5GIT - GRENOBLE - Voice/Data/Fax: +33 (0)476932598
> Email: tony@schonfeld.easynet.fr - tony@schonfeld.ml.org
> WWW: http://schonfeld.home.ml.org - http://www.voiron.com/associations/ham/
> Hamnet (ax25): f5git@f5ycp.frha.fra.eu - f5git@f5ycp.ampr.org
>
>
Best wishes
- Karl F. Larsen, 3310 East Street, Las Cruces,NM (505) 524-3303 -
Reply to: