Hello, I've been messing around with Debian/Linux for about 3 months now. I recently acquired a modem for my hamm box and am trying to set up my system for a ppp/pap connection. I have run pppconfig, and now when I do "pon", the system waits about 1/2 minute, and dials the ISP's number. After the modem dials the number, I can hear the carrier-detect; then the modem disconnects in about another 1/2 minute. The same thing happens (more or less) when I run minicom. I have attached some of some related files. Also, this computer is on a LAN (in case that makes any difference). I got some help today (in IRC) from someone who works at an ISP that runs Debian, and he was stumped. If anyone can figure this out, I will owe you a beer (or six). TIA, --David
Attachment:
etc.chatscripts.provider
Description: Binary data
Attachment:
etc.ppp.pap-secrets
Description: Binary data
Attachment:
etc.ppp.peers.provider
Description: Binary data
Sep 26 03:07:55 falcon chat[2670]: ATDT9494614^M Sep 26 03:07:55 falcon chat[2670]: CONNECT Sep 26 03:07:55 falcon chat[2670]: -- got it Sep 26 03:07:55 falcon chat[2670]: send (\d) Sep 26 03:07:56 falcon pppd[2669]: Serial connection established. Sep 26 03:07:57 falcon pppd[2669]: Using interface ppp0 Sep 26 03:07:57 falcon pppd[2669]: Connect: ppp0 <--> /dev/ttyS1 Sep 26 03:07:58 falcon pppd[2669]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magi c 0xffff0065> <pcomp> <accomp>] Sep 26 03:08:25 falcon last message repeated 9 times Sep 26 03:08:28 falcon pppd[2669]: LCP: timeout sending Config-Requests Sep 26 03:08:28 falcon pppd[2669]: Connection terminated. Sep 26 03:09:05 falcon pppd[2669]: Hangup (SIGHUP) Sep 26 03:09:06 falcon pppd[2669]: Exit.