Re: Sound Problems
On Tue, 18 Aug 1998, Lars Steinke wrote:
>
> Well, I configured my kernel for SB 16 first, then patched it with awedrv,
> redid make menuconfig with AWE32 support (see auxiliary devices at the
> bottom). Then I did a pnpdump and uncommented the normal Soundblaster
> settings I set before when going through make menuconfig:
> INT 5, Port 0x220, DMA 1 & 3, Port 330 for MPU401
> isapnp is called on startup by default, check what file it calls on your
> system, for me it's /etc/isapnp.conf.
done so.
> Why don't you just try isapnp with the pnpdump you prepared and see
> whether it initializes the card without errors ?
>
isapnp /etc/isapnp.conf reports no errors.
> After booting with the new kernel (don't forget to rerun lilo !!!) it all
> works a treat... As I call the init program from the awe32 tools to load
> soundfonts into the AWE's memory the kernel daemon inserts sound.o
The problem is that all things are semm to be going well. The software do
not report any errors.
output of `cat /dev/sndstat` seem to be ok:
Sound Driver:3.5.4-960630 (Sat Aug 15 11:30:10 CEST 1998 root,
Linux vampira 2.0.34 #1 Fri Aug 14 19:35:12 CEST 1998 i486 unknown)
Kernel: Linux vampira 2.0.34 #1 Sat Aug 15 11:30:54 CEST 1998 i486
Config options: 0
Installed drivers:
Type 1: OPL-2/OPL-3 FM
Type 2: Sound Blaster
Type 7: SB MPU-401
Card config:
Sound Blaster at 0x220 irq 5 drq 1,5
SB MPU-401 at 0x330 irq 5 drq 0
OPL-2/OPL-3 FM at 0x388 drq 0
Audio devices:
0: Sound Blaster 16 (4.16)
Synth devices:
0: Yamaha OPL-3
1: AWE32-0.4.2c (RAM512k)
Midi devices:
0: Sound Blaster 16
Timers:
0: System clock
Mixers:
0: Sound Blaster
1: AWE32 Equalizer
I am really confused about this.
Jens
Reply to: